Required Time; Changing Settings While Washing - Panasonic NA-140VS4 Operating Instructions & Installation Instructions

5. Add detergent to the detergent
drawer.
(See pages 10-11.)
6. Press the Start button.
The appliance starts supplying water.
After the appliance has started, the
laundry is weighed. After approximately
5 seconds, a new programme time
will be displayed. If you select the
Wool, Rapid 15, Shirts, Sportswear,
Bedding, Wrinkle-care, Daily or Refresh
programmes, the laundry is not
weighed.
The buzzer will sound when the
programme has finished, and the door
will unlock immediately.
Remove the laundry and rearrange where
necessary. Do not leave it in the drum too
long after the programme ends to prevent
colour transfer.
CAUTION
After a high temperature wash, be
careful not to burn yourself when
handling the laundry or touching
the inside of the drum.
NOTE
- If the detergent is not completely
removed from the laundry by using
the basic programme, use the Extra
Rinse function.
- With the Eco and the Speed functions,
if the load is big, the laundry may
stick to the inside of the drum. This is
normal.
NA-140_148VS4_AUNZ_EN_20140213.indb 13

Required time

Required time depends on the programme
and temperature setting.
- Actual time may differ slightly from the
displayed time.
- The displayed time includes the time
needed for the water to fill up and to
drain out, thus they vary depending on
water pressure, drainage and amount of
laundry.
- If you change the function setting
while washing, the displayed time may
change.
- If the laundry in the drum needs to be
balanced, the time will be extended.
Changing settings while
washing
After washing has started, the programme,
temperature and preset time cannot be
changed.
- To change the programme or temperature
setting, turn the appliance off and then on
again.
- To change the rinse or spin setting while
washing, press the Pause button once
the appliance is full of water.
- You can change the Spin speed, Extra
Rinse and Easy Ironing function during
the washing process.
- No settings can be changed after the
washing process has finished.
Washing Instructions - 13
Washing
2014/02/13 13:35:36