Assembly Instructions - SOLE SB900 Owner's Manual

ASSEMBLY INSTRUCTIONS

PRE-ASSEMBLY
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the
dotted Line. Lift Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts.
If damaged parts are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. Remove the tools first. Remove the hardwarefor
each step as needed to avoid confusion. The numbers in the instructions that are in
parenthesis (#) are the item number from the assembly drawing for reference.
1
STABILIZER TUBES
1. Install the front and rear stabilizers with four Button Head Socket Bolts (81), four
Curved Washers (83) and four Nuts (82). The front and rear stabilizer are different.
Be sure to assemble the stabilizer with the wheels onto the front of the bike. Tighten
the hardware using the wrench provided.
Dyaco Canada Inc 2015 6
HARDWARE STEP 1
#82. 3/8" Nut (4 pcs)
#81. 3/8" x 3-1/2"
Button Head Socket
Bolt (4 pcs)
#83. 3/8" x 23mm
Curved Washer
(4 pcs)
customerservice@dyaco.ca