Furuno PG-500 Operator's Manual page 3

SAFETY INSTRUCTIONS
Safety Information for the Installer
WARNING
Turn off the power at the mains
switchboard before beginning the
installation.
Post a sign near the switch to indicate
it should not be turned on while the
equipment is being installed.
Fire or electrical shock can result if the
power is left on or is applied while the
equipment is being installed.
CAUTION
Turn off the autopilot before aligning
heading.
The autopilot may turn the rudder suddenly.
Safety Information for the Operator
WARNING
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Turn off the power immediately if water
leaks into the equipment or the
equipment is emitting smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Do not place liquid-filled containers on
the top of the equipment.
Fire or electrical shock can result if a liquid
spills into the equipment.
CAUTION
Confirm that the power supply voltage
is compatible with the voltage rating
of the equipment.
Connection to the wrong power supply
can cause fire or damage the equipment.
Use the supplied power cable.
Use of a wrong power cable can cause
fire or damage the equipment.
Maintain the compass safe distance to
prevent deviation to a magnetic
compass.
Standard compass
0.3 m
CAUTION
Turn off the autopilot before selecting
output data format.
The autopilot may turn the rudder suddenly.
ii
Steering compass
0.3 m