LanParty DK P45-T3RSB Plus User Manual page 97

Load from this Bank
To load the setting saved in the bank, move the cursor to "Load
from this Bank" then press <Enter>. The setting in this bank will
replace the current setting. Make sure to save before you exit the
BIOS setup utility by selecting "Y" in the "Save & Exit Setup"
submenu.
Hotkey
You can now load a BIOS setting during system boot up; bypassing
the lengthy process of entering the BIOS utility to load a setting.
Move the cursor to "Hotkey" then press <Enter>. Select the key you
would like to use to load the settings from the bank. When the
system boots up, press the key to load the setting.
3
BIOS Setup
9 7