LanParty DK P45-T3RSB Plus User Manual page 65

UR2 Duplex Mode
Half Data is completely transmitted before receiving
data.
Full Transmits and receives data simultaneously.
PWRON After PWR-Fail
Off When power returns after an AC power failure,
the system's power is off. You must press the
Power button to power-on the system.
On When power returns after an AC power failure,
the system will automatically power-on.
Former-Sts When power returns after an AC power failure,
the system will return to the state where you left
off before power failure occurs. If the system's
power is off when AC power failure occurs, it will
remain off when power returns. If the system's
power is on when AC power failure occurs, the
system will power-on when power returns.
CIR Port Address
This field is used to select an I/O address for the CIR device.
CIR Port IRQ
This field is used to select an IRQ for the CIR device.
3
BIOS Setup
65