HP 17bII+ Quick Start Manual page 9

Table 1- 1
Functions
Number display
format
(page 34)
The default setting is two digits to the right of the decimal
point. To change the number of displayed decimal places:
E
1. Press .
A
2. Press FIX followed by a number 0- 1 1 to specify the
number of digits displayed to the right of the decimal
point.
H
3. Press
4. The calculator automatically returns to the MAIN menu.
Note: you may set the number display from within a menu
or during calculations. If you are working within the
Business menu (BUS) for example, and you press
set the number display, after pressing
above, the calculator returns you to the BUS menu. If you
are performing a calculation, you are returned to current
work.
To see a number as precisely as possible:
E
1. Press
A
2. Press ALL to view all digits, 12 digits maximum.
3. The calculator returns you to current work
automatically.
Display/Description
.
E
H
in the steps
Getting Started
to
5