HP 17bII+ Quick Start Manual page 10

Table 1- 1
Functions
Digit separator
(page 35)
6 Getting Started
In the number shown in the above image, the digit
separator is a comma (,). The decimal point is a point (.)
These are the default settings. To change the digit
separator from a comma to a period:
E
1. Press .
2. Specify the decimal point as either a point (.), or a
comma (,).
3. Pressing (,) specifies the decimal point as a comma (,)
and a point (.) as the digit separator (see below).
Note: You may set the digit separator from within a menu
or during calculations. If you are working within the
Business menu (BUS) for example, and you press
set the digit separator, after your selection in the steps
above, the calculator returns you to the BUS menu. If you
are performing a calculation, you are returned to current
work.
Display/Description
E
to