GE 25833 Instructions Manual page 42

SEARCHING
OUT OF RANGE
PAGING or
PAGING FROM
BLOCKED NUMBER
REPT
NO CALLS
NO DATA
NEW CALL XX
LOW BATTERY
LONG DISTANCE
PRESS TALK KEY
CHARGING...
Handset Sound Signals
Signal
A long warbling tone (with ringer on)
Three short beeps
One long beep
One short beep (every 7 seconds)
One short beep (during room monitoring)
42
Indicates handset is searching for the base.
Indicates handset is too far away from the base. Move
closer to the base.
Someone pressed the INT button on the handset
or the PAGE button on the base.
Indicates the person is calling from a number which is
blocked from transmission.
Indicates a repeat call message. Indicates a new call from
the same number was received more
than once.
Indicates there are no CID records in memory.
Indicates no CID information was received , you are not
subscribed to CID service, or CID service is not working.
XX represents the number of new CID records
not reviewed.
Indicates the battery needs to be charged.
Indicates CID record is from a long distance call.
Indicates CID record is Direct Dial Number and cannot be
formatted.
Indicates the handset needs to charge for a period of time
before it can resume normal function.This will happen
after placing the handset on the cradle after you insert the
battery.
Meaning
Signals an incoming call
Page signal
Confirmation tone for the completion of
a function
Low battery warning
Ring alert tone