Kodak HERO 9.1 Extended User Manual page 105

Fax Setting
Print Fax Settings
Print Fax Cover Page --
Print Fax Activity Log --
Dialing Mode
Error Correction
To adjust fax settings from the Online Printer Management Tool:
1. Open the Online Printer Management Tool (see
Management Tool, page
2. Select the Settings tab, then select Fax > Settings.
3. Change the Sender Information and/or fax Settings as needed.
4. Click Save to update the settings.
www.kodak.com/go/aiosupport
Options
--
Tone (default) / Pulse Determines how the printer dials a fax
On (default) / Off
20).
KODAK HERO 9.1 All-in-One Printer
Description
To print the current fax settings, load
letter or A4 paper, then press
The Fax Cover Page shows the date and
headings for To and From information for
your fax. Use this cover page, if needed,
when sending a fax.
To print a Fax Cover Page, load letter or
A4 paper, then press
The Fax Activity Log contains
information (date, time, duration,
to/from, number of pages, and more)
about the last 30 faxes sent and/or
received.
To print a Fax Activity Log, load letter or
A4 paper, then press
number.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Error correction is applied only when
sending black and white faxes. It reduces
the loss of data, which can occur on poor
quality phone lines.
Error correction increases the send time
on poor quality phone lines, but the
transmission is more reliable. (Error
correction does not apply to faxes being
received.)
Accessing the Online Printer
.
.
.
99