Hookups; Hooking Up The Player; Step 1: Connecting The Video Cords - Sony DVP-NS700P Operating Instructions Manual

Hookups

Hooking Up the Player

Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, turn off the power, check that you have all of the supplied accessories, and insert
the batteries into the remote (page 15).
Notes
N
Plug cords securely to prevent unwanted noise.
N
Refer to the instructions supplied with the components to be connected.

Step 1: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). In order to view progressive signal (480p) pictures with a
compatible TV, projector, or monitor, you must use connection C.
A
INPUT
VIDEO
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
INPUT
S VIDEO
TV, projector, or AV
B
amplifier (receiver)
l : Signal flow
18
Audio/video
(yellow)
cord (supplied)
(yellow)
R– AUDIO 1 – L VIDEO 1
Y
1
P
2
B
R– AUDIO 2 – L VIDEO 2
P
R
S VIDEO COMPONENT VIDEO OUT
LINE OUT OUT VIDEO OUT SCAN SELECT
S VIDEO cord
(not supplied)
Component video
cord (supplied)
(green) (blue)
PROGRESSIVE
INTERLACE
SELECTABLE
COMPONENT
VIDEO IN
Y
(green)
P
B
(blue)
P
R
(red)
TV, projector, or AV
amplifier (receiver)
(red)
CD/DVD player
C