Sony DVP-NS700P Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. DVP-NS700P - Cd/dvd Player
  6. Service manual
Sony DVP-NS700P Service Manual

Sony DVP-NS700P Service Manual

Cd/dvd player
Hide thumbs Also See for DVP-NS700P:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Training Manual
QQ
3 7 63 1515 0
SERVICE MANUAL
System
Laser
Signal format system
Audio characteristics
Frequency response
TE
L 13942296513
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with
a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL) jacks
are converted to 48 kHz sampling frequency.
Outputs
Jack name
Jack type
LINE OUT L/R (AUDIO) (1/2) Phono jack
DIGITAL OUT (OPTICAL)
Optical output jack
DIGITAL OUT (COAXIAL)
Phono jack
LINE OUT (VIDEO) (1/2)
Phono jack
S VIDEO OUT (1/2)
4-pin mini DIN
COMPONENT VIDEO
Phono jack
OUT(Y, P
, P
)
B
R
www
.
http://www.xiaoyu163.com
Semiconductor laser
NTSC
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
115 dB (LINE OUT L/R (AUDIO) 1/2 jacks only)
0.003 %
DVD: 103 dB
CD: 99 dB
Less than detected value (±0.001% W PEAK)
Maximum output level
Load impedance
2 Vrms (at 50 kilohms)
Over 10 kilohms
-18 dBm
Wave length: 660 nm
0.5 Vp-p
75 ohms terminated
1.0 Vp-p
75 ohms, sync negative
Luminance signal: 1.0 Vp-p
75 ohms, sync negative
Color signal: 0.286 Vp-p
75 ohms terminated
Y: 1.0 Vp-p
75 ohms, sync negative
P
, P
: 0.7 Vp-p
75 ohms
B
R
x
ao
y
i
http://www.xiaoyu163.com
DVP-NS700P
8

SPECIFICATIONS

General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Q Q
3
6 7
1 3
Supplied accessories
Check that you have the following items:
• Audio/video cord (pinplug × 3 y pinplug × 3) (1)
• Remote commander (remote) RMT-D129A (1)
• Size AA (R6) batteries (2)
• Component video cord (pinplug × 3 y pinplug × 3) (1)
Specifications and design are subject to change without notice.
E
S
NERGY
TAR
R
has determined that this product meets the
u163
.
2 9
9 4
2 8
RMT-D129A
Canadian Model
120V AC, 60 Hz
15 W
430 × 74 × 256 mm (17 × 3 × 10
1
/
8
2.7 kg (5 lb)
5 ° C to 35 ° C (41 ° F to 95 ° F)
25 % to 80 %
1 5
0 5
8
2 9
9 4
E
S
is a U.S. registered mark. As an
NERGY
E
S
guidelines for energy efficiency.
NERGY
TAR
R
m
CD/DVD PLAYER
co
9 9
US Model
in.) (w/h/d) incl. projecting parts
2 8
9 9
TAR
R
Partner, Sony Corporation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVP-NS700P and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sony DVP-NS700P

Summary of Contents for Sony DVP-NS700P

  • Page 1: Specifications

    48 kHz sampling frequency. Specifications and design are subject to change without notice. Outputs NERGY is a U.S. registered mark. As an NERGY Partner, Sony Corporation has determined that this product meets the guidelines for energy efficiency. NERGY Jack name Jack type...
  • Page 2 OPERATION. REPLACE THESE COMPONENTS WITH DE FONCTIONNEMENT. NE REMPLACER CES COM- SONY PARTS WHOSE PART NUMBERS APPEAR AS POSANTS QUE PAR DES PIÈCES SONY DONT LES SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- NUMÉROS SONT DONNÉS DANS CE MANUEL OU LISHED BY SONY.

  • Page 3: Table Of Contents

    http://www.xiaoyu163.com 3 7 63 1515 0 TABLE OF CONTENTS Section Title Page Section Title Page Service Note ................4 AV-58 Printed Wiring Board .......... 4-33 AV-58 (VIDEO BUFFER) Schematic Diagram ....4-35 GENERAL AV-58 (AUDIO AMP) Schematic Diagram ....4-37 IF-83 Printed Wiring Board ...........

  • Page 4: Service Note

    http://www.xiaoyu163.com SERVICE NOTE 3 7 63 1515 0 1. DISASSEMBLY • This set can be disassembled in the order shown below. Case (Page 2-1) Tray Cover AV-58 Board (Page 2-1) (Page 2-1) Mechanism Deck Front Panel MB-100 Board (Page 2-2) (Page 2-2) (Page 2-1) Tray...
  • Page 5 http://www.xiaoyu163.com 3 7 63 1515 0 2. DISC REMOVAL PROCEDURE 1) Remove the case from the set. (Refer to 2-1) 2) Remove the rear panel as shown in Fig. 2. (at POWER OFF) 1) Insert a tapering driver into the aperture of the unit bottom, and move the lever of chuck cam in the direction of the arrow 6 Rear panel A.
  • Page 6 http://www.xiaoyu163.com 3 7 63 1515 0 5) Set the stand (with CK-106 board) as shown in Fig. 4. 8) Set the MB-100 board as shown in Fig. 7, Fig. 8. 1 MB-100 board 2 Connector 1 Flexible flat cable (FFC9P: CN902) 4 Two screws (B3) (FFC9P: CN102) 3 Flexible flat cable...
  • Page 7 http://www.xiaoyu163.com 3 7 63 1515 0 5. CONNECTION OF SERVICE JIG AV-58 CN102 CN203 FFC9P FFC25P CK-105 CN902 CN801 FFC26P FFC26P (Used the set) CN101 CN102 CN201 FFC 9P FFC 9P (Used the set) MB-100 CN103 CN104 CN202 FFC 5P Mechanism deck FFC 5P (Used the set)

  • Page 8: General

    DVP-NS700P SECTION 1 This section is extracted from instruction 3 7 63 1515 0 GENERAL manual (3-068-059-11). Region code Note About this Manual Notes about the Discs Some CD-Rs or CD-RWs cannot be played on this Your player has a region code printed on the...
  • Page 9 http://www.xiaoyu163.com 3 7 63 1515 0 OPEN/CLOSE button (30) Remote Rear Panel B Number buttons C CLEAR button (34) D ANGLE button (53) 5 AUDIO button (49) 6 PROGRAM button (34) 7 SHUFFLE button (36) H ./> PREV/NEXT buttons (30) I c / C SEARCH/STEP buttons R–...

  • Page 10: Getting Started

    http://www.xiaoyu163.com 3 7 63 1515 0 Getting Started Each time you press DISPLAY, the Control Menu display changes as follows: Quick Overview Control Menu display 1 Control Menu display 2 A quick overview presented in this chapter will give you enough information to start using the (The items except the first three items from the top are changed to other items.) player for your enjoyment.

  • Page 11: Hookups

    In the case of 480 progressive scan picture problems, it is recommended that the user switch the connection to the standard definition output. If there are questions regarding your Sony TV set’s compatibility with this model 480p DVD player, please contact our customer service center. S VIDEO cord...
  • Page 12 http://www.xiaoyu163.com 3 7 63 1515 0 Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and an MD deck or DAT deck 3 to 6 speakers This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your sound.

  • Page 13: Playing Discs

    http://www.xiaoyu163.com 3 7 63 1515 0 5 Press X/x to select a language. qa Press X/x to select the item, then press ENTER. The player uses the language selected here to display the DVD menu and subtitles as well. • When “NO” or “LINE OUTPUT L/R (AUDIO)” is selected, Quick Setup is finished and connections are complete.
  • Page 14 http://www.xiaoyu163.com 3 7 63 1515 0 Notes on playing DTS sound tracks on Additional operations Notes Resuming Playback from a CD • Depending on where you stopped the disc, the player • When playing DTS-encoded CDs, may not resume playback from exactly the same the Point Where You point.
  • Page 15 http://www.xiaoyu163.com 3 7 63 1515 0 Press H to start Program Play. Various Play Mode Press DISPLAY twice (when playing a Select the title, chapter, or track you CD, press once). want to program. Program Play begins. Functions (Program Play, Shuffle The Control Menu appears.

  • Page 16: Searching For A Scene

    http://www.xiaoyu163.com 3 7 63 1515 0 Searching for a Scene To turn off the Control Menu Locating a point quickly by playing a Press X/x to select “SET t,” then Searching for a Particular Press DISPLAY repeatedly until the Control disc in fast forward or fast reverse press ENTER.

  • Page 17: Viewing Information About The Disc

    http://www.xiaoyu163.com 3 7 63 1515 0 xWhen playing a VIDEO CD with To turn off the Control Menu Searching by Scene Press ENTER. (VIEWER) PBC Playback Press DISPLAY repeatedly until the Control (SCENE) Menu is turned off. xWhen playing a CD To return to the normal play To search for a scene using the time Press O RETURN.

  • Page 18: Sound Adjustments

    http://www.xiaoyu163.com 3 7 63 1515 0 xWhen playing a DVD Checking the DVD/CD text The playing time and remaining time of the current • T ** : ** : ** Checking the Playing chapter, title, track, scene, or disc will also appear on Press TIME/TEXT repeatedly in Step 3 to your TV screen.

  • Page 19: Enjoying Movies

    http://www.xiaoyu163.com 3 7 63 1515 0 The display examples are as follows: Displaying the audio information of TV Virtual Surround Sound • PCM (stereo) Press X/x to select one of the TVS the disc (TV Virtual Surround) sounds. Settings (TVS) PROGRAM FORMAT Refer to the following explanations When you select “AUDIO,”...

  • Page 20: Adjusting The Picture

    http://www.xiaoyu163.com 3 7 63 1515 0 Displaying the Subtitles Press X/x to select the language. Adjusting the Picture Press X/x to select a level. Depending on the DVD, the choice of As the value increases, the mosaic like Quality (BNR) language varies.

  • Page 21: Using Various Additional Functions

    http://www.xiaoyu163.com 3 7 63 1515 0 Using Various Additional Functions Enhancing the Playback Press X/x to select a level. Press X/x to select Locking Discs (CUSTOM (CUSTOM PARENTAL CONTROL), then press As the value increases, the outlines of Picture (DIGITAL VIDEO ENHANCER) PARENTAL CONTROL, PARENTAL ENTER.
  • Page 22 The default signal Number buttons Select the channel of the Curtis-Mathes Radio Shack 05,14 and ENTER (01) will control Sony TVs. Daytron 04,10 If you connect the player to an AV amplifier Emerson 03,04,14 Sampo (receiver), you can control the volume with...

  • Page 23: Settings And Adjustments

    3 7 63 1515 0 Settings and Adjustments Manufacturer Code number LANGUAGE SETUP Using the Setup Display ENGLISH OSD: Sony 91, 89 ENGLISH DVD MENU: AUDIO: ORIGINAL Denon 84, 85, 86 SUBTITLE: ENGLISH Kenwood 92, 93 By using the Setup Display, you can make...
  • Page 24 http://www.xiaoyu163.com 3 7 63 1515 0 second. Film based software is derived from BLACK The background color is black. Progressive Conversion Methods of film and displays images at 24 frames per 4:3 LETTER BOX Film Based and Video Based xCOMPONENT OUT second.

  • Page 25: Additional Information

    Even though you set the aspect ratio any problem persist, consult your nearest such as Stop, Search, Slow-motion on the player. Sony dealer. in “TV TYPE” of “SCREEN SETUP,” Play, Repeat Play, Shuffle Play, or , The batteries in the remote are weak.

  • Page 26: Language Code List

    E XX To prevent a malfunction, the , Contact your Sony dealer or local authorized (xx is a number) CD/DVD player has performed DTS (page 24, 75) Interlace format (page 70) the self-diagnosis function.
  • Page 27 http://www.xiaoyu163.com 3 7 63 1515 0 CUSTOM SETUP (page 72) List of Setup Display Items AUTO PLAY TIMER DEMO1 The default settings are underlined. DEMO2 LANGUAGE SETUP (page 68) DIMMER BRIGHT DARK ENGLISH FRENCH SPANISH PAUSE MODE AUTO PORTUGUESE FRAME PARENTAL CONTROL t DVD MENU ENGLISH...

  • Page 28: Disassembly

    DVP-NS700P SECTION 2 DISASSEMBLY 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 2-1. CASE REMOVAL 2-3. MB-100 BOARD REMOVAL 4 Case 1 Three flexible flat cables (FMO-001: CN201/ 1 Three tapping screws...

  • Page 29: Front Panel Removal

    http://www.xiaoyu163.com 3 7 63 1515 0 2-5. FRONT PANEL REMOVAL 2-7. RM-85 BOARD REMOVAL 1 Connector (CN402) 1 Flexible flat cables (FIR-003: CN501) 4 Claw 2 Screw (B3) 3 RM-85 board 5 Front panel 3 Two claws 2 Claw 2-6. POWER BLOCK REMOVAL 2-8.

  • Page 30: Board Removal

    http://www.xiaoyu163.com 3 7 63 1515 0 2-9. IF-83 BOARD REMOVAL 2-11. LOADING MOTOR (M001), MS-81 BOARD REMOVAL 3 Two screws (B3) 1 BELT 4 Multi pillar 2 Connector (CN201) 5 Three screws (B3) 2 Two screws (P2.6 x 4) 1 Flexible flat cable (FIR-003: CN406) 2 Connector (CN101)

  • Page 31: Internal Views

    http://www.xiaoyu163.com 3 7 63 1515 0 2-13. INTERNAL VIEWS DC motor (loading) 1-541-632-11 L 13942296513 DC motor (loading) 1-541-632-11 Optical pick-up (KHM-240AAA/J1RP) 8-820-144-06 u163 http://www.xiaoyu163.com...

  • Page 32: Circuit Boards Location

    http://www.xiaoyu163.com 3 7 63 1515 0 2-14. CIRCUIT BOARDS LOCATION Power Block (HS13S0U) (SWITCHING REGULATOR) AV-58 (AUDIO/VIDEO OUT) RM-85 (REMOTE COMMANDER RECEIVER) MS-81 MB-100 (LOADING) (SIGNAL PROCESS, SERVO) IF-83 (INTERFACE CONTROL) L 13942296513 u163 2-5 E http://www.xiaoyu163.com...

  • Page 33: Block Diagrams

    DVP-NS700P SECTION 3 3 7 6 3 1 5 1 5 0 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM AV-58 BOARD MB-100 BOARD (SEE PAGE 4-35 to 4-38) (SEE PAGE 4-11 to 4-30) IC504, 505 16M SDRAM J103 S VIDEO OUT...

  • Page 34: Rf/Servo Block Diagram

    DVP-NS700P 3-2. RF/SERVO BLOCK DIAGRAM 3 7 6 3 1 5 1 5 0 IC202 tl (CD play) IC202 2 (DVD play) IC202 2 (CD play) IC202 tl (DVD play) IC202 rs (DVD play) IC202 rs (CD play) 500 mV/DIV 50 ns/DIV...

  • Page 35: Signal Processor Block Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 3-3. SIGNAL PROCESSOR BLOCK DIAGRAM MB-100 BOARD (2/5) (SEE PAGE 4-13 to 4-18) IC504, 505 16M SDRAM IC303 16M DRAM IC302 <zcz (DVD play) 500 mV/DIV 100 ns/DIV IC503 yl 124 125 127 128 157 –...

  • Page 36: System Control Block Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 3-4. SYSTEM CONTROL BLOCK DIAGRAM MB-100 BOARD (3/5) (SEE PAGE 4-21 to 4-24) IC107 IC108 FLASH HA 0 – 21 HA 0 – 21 HD 0 – 15 HD 0 – 15 IC103 tf 1 –...

  • Page 37: Video Block Diagram

    DVP-NS700P 3-5. VIDEO BLOCK DIAGRAM 3 7 6 3 1 5 1 5 0 AV-58 BOARD (1/2) IC102 ed J101 (2/2) (SEE PAGE 4-35) IC102 VIDEO BUFFER VIDEO 1 CN203 (1/2) LINE OUT 2.4 Vp-p (H) VIDEO VIDEO VIDEO 2...

  • Page 38: Audio Block Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 3-6. AUDIO BLOCK DIAGRAM AV-58 BOARD (2/2) (SEE PAGE 4-37) MB-100 BOARD (5/5) (SEE PAGE 4-25) IC204 1 D IN OPTICAL DIGITAL CN801 (3/3) CN203 (2/2) J201 SPDIF Q211...

  • Page 39: Interface Control Block Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 3-7. INTERFACE CONTROL BLOCK DIAGRAM IF-83 BOARD (SEE PAGE 4-41) RM-85 BOARD (SEE PAGE 4-6) CN403 IC501 BZ401 REMOTE COMMANDER BUZZER RECEIVER CN406 CN501 SIRCS SYSTEM CONTROL XIFCS XIFCS...

  • Page 40: Power 1 Block Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 3-8. POWER 1 BLOCK DIAGRAM IF-83 BOARD HS13S0U BOARD (SEE PAGE 4-41) (SEE PAGE 4-45) CN201 CN401 PS402 CN404 D221 L221 EVER+11V AU+11V T101 Q404, 405 Q211 PS401 D211 L211 EVER–11V...

  • Page 41: Power 2 Block Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 3-9. POWER 2 BLOCK DIAGRAM AV-58 BOARD (SEE PAGE 4-35 to 4-38) CN202 AI+5V IC101 –5V REG IC102 VIDEO 2 IN BUFFER Q201 AU+11V POWER 1 IC103 (SEE PAGE 3-16)

  • Page 42: Printed Wiring Boards And Schematic Diagrams

    DVP-NS700P DVP-NS700P SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 3 7 6 3 1 5 1 5 0 THIS NOTE IS COMMON FOR PRINTED WIRING For schematic diagram: • Caution when replacing chip parts. BOARDS AND SCHEMATIC DIAGRAMS.

  • Page 43: Frame Schematic Diagram

    DVP-NS700P 4-1. FRAME SCHEMATIC DIAGRAM 3 7 6 3 1 5 1 5 0 BASE UNIT KHM-250AAA/J1RP CN201 TRK- TRK- TRK+ TRK+ FCS- FCS- FCS+ FCS+ CD LD CD LD DVD LD DVD LD LD GND LD GND CN902...

  • Page 44: Printed Wiring Boards And Schematic Diagrams

    DVP-NS700P 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 3 7 6 3 1 5 1 5 0 MS-81 (LOADING), RM-85 (REMOTE COMMANDER RECEIVER) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM – Ref. No.: MS-81, RM-85 board; 1,000 series – There are a few cases that the part isn't mounted in this model is printed on this diagram.

  • Page 45: (Remote Commander Receiver

    DVP-NS700P 3 7 6 3 1 5 1 5 0 There are a few cases that the part isn't mounted in this model is printed on this diagram. MB-100 (SIGNAL PROCESS, SERVO) PRINTED WIRING BOARD – Ref. No.: MB-100 board; 2,000 series –...
  • Page 46 DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 BOARD (SIDE B) IC003 IC101 IC102 IC107 IC202 IC301 IC303 IC401 IC501 IC502 IC504 IC505 IC601 IC801 IC802 IC902 IC903 Q201 Q202 Q901 Q902 Q903 Q904 Q905 Q906...

  • Page 47: Mb-100 (Rf Amp, Servo) Schematic Diagram

    DVP-NS700P MB-100 (RF AMP, SERVO) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont 3 7 6 3 1 5 1 5 0 –...

  • Page 48: Arp, Servo Dsp) Schematic Diagram

    DVP-NS700P MB-100 (ARP, SERVO DSP) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. 3 7 6 3 1 5 1 5 0 – Ref. No.: MB-100 board; 2,000 series – SDI7 MB-100 BOARD (2/10) NO MARK:DVD/CD PLAY...

  • Page 49: Mb-100 (Av Decoder) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 (AV DECODER) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – MB-100 BOARD (3/10) MB-100 BOARD MB-100 BOARD (6/10)

  • Page 50: Bnr) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 • Waveforms MB-100 (BNR) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – 1 IC503 yd 6 IC503 i; MB-100 BOARD (4/10) C602 0.01u...

  • Page 51: Drive) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 (DRIVE) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – MB-100 BOARD (5/10) SIGNAL PATH NO MARK:DVD/CD PLAY SPINDLE SERVO(SPEED AND PHASE)

  • Page 52: System Control) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 (SYSTEM CONTROL) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – MB-100 BOARD (6/10) NO MARK:DVD/CD PLAY D:DVD PLAY C:CD PLAY +3.3V...

  • Page 53: Clock Generator

    DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 (CLOCK GENERATOR) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – MB-100 BOARD (7/10) FSEL MB-100 BOARD (6/10) IC102...

  • Page 54: Audio Dsp, D/A Converter) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 (AUDIO DSP, D/A CONVERTER) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – MB-100 BOARD (8/10) NO MARK:DVD/CD PLAY...

  • Page 55: Gate Array) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 (GATE ARRAY) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – MB-100 BOARD (9/10) MB-100 BOARD (10/10) NO MARK:DVD/CD PLAY...

  • Page 56: I/P Converter) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 MB-100 (I/P CONVERTER) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-100 board; 2,000 series – MB-100 BOARD (10/10) MB-100 BOARD (9/10) R073 X001...
  • Page 57 DVP-NS700P 3 7 6 3 1 5 1 5 0 • Waveforms 5 IC102 ws 9 IC104 qa 1 IC102 ed 2.4 Vp-p (H) 1.3 Vp-p (H) 1.6 Vp-p (H) 6 IC102 w; 2 IC102 ea 1.8 Vp-p (H) 1.3 Vp-p (H)
  • Page 58 DVP-NS700P 3 7 6 3 1 5 1 5 0 There are a few cases that the part isn't mounted in this model is printed on this diagram. AV-58 (AUDIO/VIDEO OUT) PRINTED WIRING BOARD – Ref. No.: AV-58 board; 1,000 series –...

  • Page 59: Video Buffer) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 AV-58 (VIDEO BUFFER) SCHEMATIC DIAGRAM • See page 4-33 for printed wiring board, and see page 4-32 for waveforms. – Ref. No.: AV-58 board; 1,000 series – AV-58 BOARD (1/2)

  • Page 60: Av-58 (Audio Amp) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 AV-58 (AUDIO AMP) SCHEMATIC DIAGRAM • See page 4-33 for printed wiring board. – Ref. No.: AV-58 board; 1,000 series – AV-58 BOARD (2/2) R201 R210 4700 2200 C207 0.01u...
  • Page 61 DVP-NS700P 3 7 6 3 1 5 1 5 0 IF-83 (INTERFACE CONTROL) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: IF-83 board; 1,000 series –...

  • Page 62: If Con) Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 IF-83 (IF CON) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: IF-83 board; 1,000 series –...
  • Page 63 DVP-NS700P 3 7 6 3 1 5 1 5 0 HS13S0U (SWITCHING REGULATOR) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: HS13S0U board; 5,000 series –...

  • Page 64: Hs13S0U Schematic Diagram

    DVP-NS700P 3 7 6 3 1 5 1 5 0 HS13S0U (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: HS13S0U board; 5,000 series –...

  • Page 65: Ic Pin Function Description

    DVP-NS700P SECTION 5 IC PIN FUNCTION DESCRIPTION 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 66 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 5-2 E http://www.xiaoyu163.com...

  • Page 67: Test Mode

    DVP-NS700P SECTION 6 TEST MODE 3 7 63 1515 0 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment eas- The same contents as board detail check by serial interface can be ily using the remote commander and monitor TV.
  • Page 68 http://www.xiaoyu163.com 3 7 63 1515 0 Submenu (2-4) Model Type Model code is displayed. Selecting 2 and subsequent items calls the submenu screen of each Error: Not detected. item. The model code read from the EEPROM is displayed with For example, if “5. Supply” is selected, the following submenu 2-digit hexadecimal number.
  • Page 69 http://www.xiaoyu163.com 3 7 63 1515 0 5. Supply (5-5) ARP RAM Check Data write → read, and accord check (5-2) ARP Register Check Data write → read, and accord check Error 11: ARP RAM read data discord The program code data stored in ROM are copied to all Error 08: ARP register write, and read data discord areas of RAM (IC303) connected to the ARP (IC302) Data 0x00 to 0xFF is written sequentially to the ARP TMAX...
  • Page 70 http://www.xiaoyu163.com 3 7 63 1515 0 9. Progre Device Error Codes List (9-2) I/P Converter Data write → read, and accord check 00: Error not detected 01: RAM write/read data discord Error 03: EEPROM write/read discord 02: Gate array NG Data 0xCC is written to the address 0x9B of the EEPROM 03: EEPROM NG and then read for checking.

  • Page 71: Drive Auto Adjustment

    http://www.xiaoyu163.com 3 7 63 1515 0 6-4. DRIVE AUTO ADJUSTMENT 1. DVD-SL (single layer) [ENTER] Select , insert DVD single layer disc, and press key, and the adjustment will be made through the following steps, then On the Test Mode Menu screen, press key on the remote com- adjusted values will be written to the EEPROM.
  • Page 72 http://www.xiaoyu163.com 3 7 63 1515 0 2. CD 3. DVD-DL (dual layer) [ENTER] [ENTER] Select , insert CD disc, and press key, and the adjust- Select , insert DVD dual layer disc, and press key, ment will be made through the following steps, then adjusted val- and the adjustment will be made through the following steps, then ues will be written to the EEPROM.

  • Page 73: Drive Manual Operation

    http://www.xiaoyu163.com 3 7 63 1515 0 6-5. DRIVE MANUAL OPERATION 0. Disc Check Memory Disc Check On the Test Mode Menu screen, select , and the manual opera- tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. 1.
  • Page 74 http://www.xiaoyu163.com 3 7 63 1515 0 Sled Turn ON/OFF the sled servo. Disc Type 1. Disc Type Auto Check CLVA Turn ON/OFF normal servo of spindle 2. DVD SL 12 cm servo. 3. DVD DL 12 cm 4. CD 12cm FCS.
  • Page 75 http://www.xiaoyu163.com 3 7 63 1515 0 4. Manual Adjustment Auto EQ Auto L.F. Offset Adjusts loop filter offset. Manual Adjustment 1. TRK. Offset 2. Focus Gain Auto Group Delay 3. TRK. Gain 4. Focus Offset 5. Focus Balance 6. Memory Check 6.

  • Page 76: Mecha Aging

    http://www.xiaoyu163.com 3 7 63 1515 0 6-6. MECHA AGING How to see Emergency History ### Mecha Aging ### Press OPEN key 1: Emergency Code 2: Don't Care These codes are used for verification of software designing. 3: Historical order 1 to 9 Abort: STOP key Emergency Codes List 10: Communication to IC202 (MB-100 board) failed.

  • Page 77: Version Information

    http://www.xiaoyu163.com 3 7 63 1515 0 6-8. VERSION INFORMATION 6-10. IF CON SELF DIAGNOSTIC FUNCTION 1. IF-83 BOARD (IF CON) TEST MODE ## Version Information ## The front board test mode is the IF CON self diagnostic mode. IF con. Ver : x.
  • Page 78 http://www.xiaoyu163.com 3 7 63 1515 0 2-2. Operation of Auto Self Check When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated. (1) FLD and LED all ON (for 5 seconds) TRACK HOUR...
  • Page 79 http://www.xiaoyu163.com 3 7 63 1515 0 2-3. Each Self Check Function Each Self Check function tests the FLD display, LED display, and key input. IC404: Pin No. (Signal) Input Voltage [V] (BNRKEY) (O/C) (PLAY) (DISPLAY) (CURSOR) Pin ed Pin ef Pin eg Pin eh Pin ej...
  • Page 80 http://www.xiaoyu163.com 3 7 63 1515 0 [PLAY] Key code display (at input of key, Key code: 0Ah) HOUR TITLE TRACK CHAP INDEX VIDEO CD DISC NTSC S H U F F L E MPEG D V D ANGLE REPEAT 1 Digital A- B At input of faulty voltage...
  • Page 81 http://www.xiaoyu163.com 3 7 63 1515 0 2-3-4. Communication Monitoring Display The communication state is monitored and displayed while the key name on the main unit and the remote commander is displayed. When the communication to the System Controller failed, VIDEO CD, DVD, and CD segments turn on.
  • Page 82 http://www.xiaoyu163.com 3 7 63 1515 0 2-3-6. FLD Grid Test Display and SHUTTLE Click Operation Test 2-3-6-1. Transition Keys in Self Check Mode [UP] • on the main unit and the remote commander • SHUTTLE on the main unit during Grid Test display 2-3-6-2.
  • Page 83 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 ( 1G~12G ) ANODE CONNECTION u163 6-17 http://www.xiaoyu163.com...

  • Page 84: Troubleshooting

    http://www.xiaoyu163.com 3 7 63 1515 0 6-11. TROUBLESHOOTING 1-2. CPUCK (33 MHz) is outputted (communication with ROM is normal) • AVD (IC503) check 6-11-1. Cannot Enter Test Mode Using an oscilloscope, measure the SDCLKO (<zv.> pin) of the You cannot enter the Test mode when either button has been pressed AVD (IC503) to check that 95 MHz is outputted.
  • Page 85 3. At button ON, LED lights in green but returns to red (standby state) after several seconds (e.g. it returns to standby state after “SONY DVD” was displayed) There is no regularity between faulty parts and timing when the set returns to the standby state).

  • Page 86: Electrical Adjustment

    DVP-NS700P SECTION 7 ELECTRICAL ADJUSTMENT 3 7 63 1515 0 7-1. POWER SUPPLY CHECK In making adjustment, refer to 7-3. Adjustment Related Parts Arrangement. 1. HS13S0U Board Note: During diagnostic check, the characters and color bars can Mode be seen only with the NTSC monitor. Therefore, for diag-...

  • Page 87: Adjustment Of Video System

    http://www.xiaoyu163.com 3 7 63 1515 0 7-2. ADJUSTMENT OF VIDEO SYSTEM 3. Checking S Video Output S-Y <Purpose> Check S-terminal video output. If it is incorrect, pictures will not 1. Video Level Adjustment (MB-100 BOARD) be displayed correctly in spite of connection to the TV with a S- <Purpose>...

  • Page 88: Checking Component Video Output Y

    http://www.xiaoyu163.com 3 7 6 3 1 5 1 5 0 5. Checking Component Video Output Y 7. Checking Component Video Output R-Y 7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT <Purpose> <Purpose> This checks component video output Y. If it is incorrect, correct This checks component video output R-Y.

  • Page 89: Repair Parts List

    Remark 3-067-237-11 EMBLEM (V), DVD 3-970-608-51 SUMITITE (B3), +BV u163 3-067-236-01 COVER (P), TRAY 1-476-714-11 ENCODER, ROTARY 4-217-485-01 EMBLEM (5-A), SONY 3-068-143-01 KEY, CURSOR 3-059-349-11 LEG CUSHION 1-476-605-21 COMMANDER, STANDARD (RMT-D129A) X-3951-613-1 FRONT PANEL ASSY 3-068-047-11 CASE 3-710-901-61 SCREW, TAPPING...

  • Page 90: Chassis Assembly

    http://www.xiaoyu163.com 3 7 63 1515 0 8-1-2. CHASSIS ASSEMBLY not supplied Mechanism deck L 13942296513 not supplied The components identified by Les composants identifiés par une not supplied mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety.

  • Page 91: Mechanism Deck Assembly

    http://www.xiaoyu163.com 3 7 63 1515 0 8-1-3. MECHANISM DECK ASSEMBLY not supplied not supplied not supplied not supplied not supplied not supplied not supplied supplied L 13942296513 supplied supplied not supplied not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety.

  • Page 92: Electrical Parts List

    0.1uF C113 1-104-660-91 ELECT 47uF < IC > C114 1-107-826-11 CERAMIC CHIP 0.1uF C115 1-104-660-91 ELECT 47uF IC101 8-759-667-17 IC L79M05TLL-SONY-TL IC102 8-759-826-45 IC LA73050-TLM C118 1-162-970-11 CERAMIC CHIP 0.01uF IC103 8-759-011-65 IC TC74HC4053AF (EL) C119 1-104-660-91 ELECT 47uF IC104...
  • Page 93 http://www.xiaoyu163.com AV-58 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JR029 1-216-295-91 SHORT R140 1-216-295-91 SHORT JR030 1-216-295-91 SHORT R141 1-216-089-91 RES-CHIP 1/10W JR031 1-216-295-91 SHORT R153 1-216-089-91 RES-CHIP 1/10W JR032 1-216-295-91 SHORT R154 1-216-081-00 METAL CHIP...
  • Page 94 http://www.xiaoyu163.com AV-58 IF-83 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D409 8-719-071-15 DIODE HZM6.8ZWA1TL R256 1-216-049-11 RES-CHIP 1/10W D412 8-719-422-62 DIODE MA8062-L-TX R279 1-216-295-91 SHORT D414 8-719-056-06 DIODE SLR-342DCT32 (BNR) R280 1-216-295-91 SHORT D415...
  • Page 95 http://www.xiaoyu163.com IF-83 MB-100 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R444 1-216-025-11 RES-CHIP 1/10W C012 1-107-826-11 CERAMIC CHIP 0.1uF R446 1-216-097-11 RES-CHIP 100K 1/10W C013 1-107-826-11 CERAMIC CHIP 0.1uF C014 1-107-826-11 CERAMIC CHIP 0.1uF R448...
  • Page 96 http://www.xiaoyu163.com MB-100 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C240 1-164-217-11 CERAMIC CHIP 150PF C413 1-164-677-11 CERAMIC CHIP 0.033uF C243 1-107-826-11 CERAMIC CHIP 0.1uF C414 1-162-970-11 CERAMIC CHIP 0.01uF C244 1-124-779-00 ELECT CHIP 10uF C415...
  • Page 97 http://www.xiaoyu163.com MB-100 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C812 1-162-970-11 CERAMIC CHIP 0.01uF < FILTER > C813 1-127-715-91 CERAMIC CHIP 0.22uF C816 1-124-779-00 ELECT CHIP 10uF FL101 1-234-177-21 FILTER, CHIP EMI C901 1-126-205-11 ELECT CHIP 47uF...
  • Page 98 http://www.xiaoyu163.com MB-100 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R002 1-216-809-11 METAL CHIP 1/16W R063 1-216-801-11 METAL CHIP 1/16W R003 1-216-809-11 METAL CHIP 1/16W R064 1-216-801-11 METAL CHIP 1/16W R004 1-216-797-11 METAL CHIP 1/16W R065...
  • Page 99 http://www.xiaoyu163.com MB-100 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R168 1-216-295-91 SHORT R343 1-218-831-11 METAL CHIP 0.5% 1/16W R170 1-216-821-11 METAL CHIP 1/16W R344 1-218-847-11 METAL CHIP 0.5% 1/16W R177 1-216-797-11 METAL CHIP 1/16W R345...
  • Page 100 http://www.xiaoyu163.com MB-100 MS-81 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R524 1-216-833-11 METAL CHIP 1/16W R954 1-216-797-11 METAL CHIP 1/16W R525 1-216-833-11 METAL CHIP 1/16W R955 1-216-797-11 METAL CHIP 1/16W R533 1-216-797-11 METAL CHIP 1/16W...
  • Page 101 http://www.xiaoyu163.com POWER BLOCK RM-85 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-468-583-11 POWER BLOCK (HS13S0U) < IC > ********************* (Ref. No. 5,000 Series) IC301 8-759-420-19 IC AN1431T IC411 8-759-420-19 IC AN1431T <...
  • Page 102 http://www.xiaoyu163.com RM-85 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > R501 1-216-097-11 RES-CHIP 100K 1/10W R502 1-216-017-91 RES-CHIP 1/10W R503 1-216-033-00 METAL CHIP 1/10W MISCELLANEOUS ************** 1-476-714-11 ENCODER, ROTARY 0 56 1-757-571-11 CORD, POWER 1-757-798-11 CABLE, FLEXIBLE FLAT (FIR-003)
  • Page 103 DVP-NS700P 3 7 63 1515 0 L 13942296513 u163 Sony Corporation 2001D0500-1 9-921-799-11 Home Video Company © 2001. 4 – 146 – Published by Quality Assurance Dept. http://www.xiaoyu163.com...

Table of Contents