Sony DVP-NS700P Operating Instructions Manual page 24

Connecting to an AV amplifier (receiver) with a digital input jack having a
D
Dolby Digital, or DTS decoder, and 6 speakers
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your
amplifier (receiver)
N Dolby Digital (5.1ch) (page 79)
N DTS (5.1ch) (page 79)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL"(page 25).
If your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 25). Otherwise, no sound or a loud
noise will come from the speakers.
CD/DVD player
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Rear
(R)
[Speakers]
Rear
(L)
l: Signal flow
24
R– AUDIO 1 – L VIDEO 1
Y
1
P
2
B
R– AUDIO 2 – L VIDEO 2
P
R
S VIDEO COMPONENT
LINE OUT OUT VIDEO OUT
D
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to optical digital input
AV amplifier (receiver) with a decoder
Subwoofer
PROGRESSIVE
INTERLACE
SELECTABLE
VIDEO OUT
SCAN SELECT
or
Coaxial digital cord
(not supplied)
to coaxial digital Front
(R)
input
[Speakers]
Front
(L)
Center