Sony DVP-NS700P Operating Instructions Manual page 70

4:3 LETTER BOX
4:3 PAN SCAN
16:9
Note
Depending on the DVD, "4:3 LETTER BOX" maybe
selected automatically instead of "4:3 PAN SCAN" or
vice versa.
xSCREEN SAVER
Turns on and off the screen saver so that the
screen saver image appears when you leave
the player in pause or stop mode for 15
minutes, or when you play back a CD for
more than 15 minutes. The screen saver will
help prevent your display device from
becoming damaged (ghosting). Press H to
turn off the screen saver.
ON
OFF
xBACKGROUND
Selects the background color or picture on the
TV screen in stop mode or while playing a CD.
JACKET
PICTURE
GRAPHICS
BLUE
70
Turns on the screen saver.
Turns off the screen saver.
The jacket picture (still picture)
appears in the background, but
only when the jacket picture is
already recorded on the disc
(CD-EXTRA, etc.). If the disc
does not contain a jacket picture,
the "GRAPHICS" picture
appears.
A preset picture stored in the
player appears in the
background.
The background color is blue.
BLACK
The background color is black.
xCOMPONENT OUT
This will change the type of signal output
from the COMPONENT VIDEO OUT jacks
on the player. See page 71 for more
information about the different types.
INTERLACE
This outputs the signal in
interlace format. Select this
when you are connected to a
standard (interlace format)
TV.
PROGRESSIVE This outputs the signal in
progressive (480p) format.
Select this when you have a
TV that can accept
progressive signals.
z
When the player outputs a Progressive video
signal, the PROGRESSIVE indicator lights up.
Note
If you select "PROGRESSIVE" when you connect the
player to a TV that cannot accept the signal in
progressive format (480p), the image quality will
deteriorate. In this case, set the VIDEO OUT SCAN
SELECT switch on the back panel of the player to
INTERLACE. Then set "COMPONENT OUT" to
"INTERLACE" when you can see the TV screen
correctly, and reset VIDEO OUT SCAN SELECT to
SELECTABLE.
When "PROGRESSIVE" is selected in
"COMPONENT OUT"
You can fine-tune the Progressive (480p)
video signal output when you select
"PROGRESSIVE" in "COMPONENT
OUT" of the "CUSTOM SETUP" display
and connect the player to the TV that is able
to accept the video signal in progressive
format (480p).
xMODE (Conversion Modes)
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV, such as dramas and sit-coms, and
displays images at 30 frames/60 fields per