Sony DVP-NS700P Operating Instructions Manual page 23

Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
C
3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital, or
DTS decoder, refer to page 24.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
(receiver) has a digital input jack, use
xRecommended surround sound effects using this connection with your
amplifier (receiver)
N Dolby Surround (Pro Logic) (page 79)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
CD/DVD player
R– AUDIO 1 – L VIDEO 1
COAXIAL OPTICAL
R– AUDIO 2 – L VIDEO 2
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
C-2
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
[Speakers]
Rear Rear
(L) (R)
Subwoofer
l: Signal flow
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
.
C-2
Y
1
PROGRESSIVE
P INTERLACE
2
B
SELECTABLE
P
R
S VIDEO COMPONENT VIDEO OUT
LINE OUT OUT VIDEO OUT SCAN SELECT
Coaxial digital cord
(not supplied)
or or
Dolby Surround amplifier (receiver)
Center
C-1
(white)
(red)
Stereo audio
cord
(not supplied)
(white) (red)
to audio input
. If your amplifier
C-1
R– AUDIO 1 – L VIDEO 1
R– AUDIO 2 – L VIDEO 2
LINE OUT
[Speakers]
Front Front
(L) (R)
Rear*
(mono)
continued
23