Sony DVP-NS700P Operating Instructions Manual page 22

Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
amplifier (receiver) has a digital input jack, use
deck, use
B-2
deck without using your stereo amplifier (receiver).
xRecommended surround sound effects for the
N TVS STANDARD (page 51)
z
In connection
z
To realize better surround sound effects, make sure that your listening position is in between your speakers.
Note
If you select one of the TVS effects while playing a disc, no sound will come from your speakers with the
CD/DVD player
COAXIAL OPTICAL
PCM/DTS/
DOLBY DIGITAL
DIGITAL OUT
B-2
COAXIAL OPTICAL
DOLBY DIGITAL
DIGITAL OUT
to coaxial or optical digital input
[Speakers]
Front
(L)
Front
(R)
l: Signal flow
22
. In this case, you can also connect the player directly to the MD deck or DAT
, you can use the supplied audio/video cord instead of using a separate audio cord.
B-1
R– AUDIO 1 – L VIDEO 1
1
2
R– AUDIO 2 – L VIDEO 2
S VIDEO
LINE OUT OUT
Coaxial digital
cord (not supplied)
PCM/DTS/
Optical digital cord
(not supplied)
Remove jack cap
before connecting
. When connecting to an MD deck or a DAT
B-2
Y
PROGRESSIVE
INTERLACE
P
B
SELECTABLE
P
R
COMPONENT VIDEO OUT
VIDEO OUT SCAN SELECT
or or
(white)
Stereo amplifier (receiver)
connection only
B-1
(white)
R– AUDIO 1 – L
(red)
Stereo audio
cord
R– AUDIO 2 – L VIDEO 2
(not supplied)
(red)
to audio input
MD deck/DAT deck
. If the
B-1
connection.
B-2
B-1
VIDEO 1
LINE OUT