Important Information; Terms Used In This Manual; Specifications - Uniden XDECT SSE25 Series Owner's Manual

Terms Used In This Manual

Accessory An extra handset that can register to and be used with an expandable phone
Handset base. All accessory handsets must be registered to a base.
The main part of the phone. It connects to your phone line and lets you make and
Base
receive calls. Most bases also have a cradle to store a handset.
(CID on Call Waiting.) A service that shows CID for calls that come in during
CIDCW
another call.
Call
A service that lets you receive calls while you are on another call.
Waiting
Caller ID (Also called CID.) A service that shows the name and number of incoming callers.
Charger A cradle that stores and charges a handset but doesn't connect to the phone line.
The part of the phone that stores a handset. While in a cradle, a handset is
Cradle
always in standby, and any keys are locked.
During a
The handset is currently on a call or has activated a dial tone.
call
Handset A cordless handset that you use to dial the phone and talk to callers.
The phone is inactive at the moment: there is no dial tone, no handset is on a call
In standby
or listening to messages.
(Text to speech) A technology that reads data in a synthesized voice. TTS is
TTS used to announce incoming CID information, read numbers from the phonebook,
etc.

Specifications

Part number AAD-065S(M)
AC
Input
adapter
voltage
Output
voltage
Part
number
Battery
pack
Capacity

Important Information

Base Charger
AAD-600S(M)
240V AC, 50Hz 240V AC, 50Hz
9V DC@ 9V DC@
500mA 210mA
BT-694n
400mAh
Use only the supplied AC

adapters.
Be sure to use the proper adapter

for the base and any chargers.
Do not place the unit in direct

sunlight or subject it to high
temperatures.
Do not place the power cord

where it creates a trip hazard or
where it could become chafed
and create a fire or electrical
hazard.
27