Call Display Service; Using Call Display Service - Panasonic KX-TG4711C Operating Instructions Manual

Using Call Display service

Important:
R This unit is Call Display compatible. To use
Call Display features, you must subscribe
to a Call Display service. Contact your
service provider/telephone company for
details.
Call Display features
When an outside call is being received, the
callers name and phone number are displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
– "Unavailable": The caller dials from
an area which does not provide a Call
Display service.
– "Private caller": The caller
requests not to send caller information.
– "Long distance": The caller makes a
long distance call.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a
missed call. The display shows "Missed
call".
Note:
R Even when there are unviewed missed
calls, "Missed call" disappears from the
standby display if the following operation is
performed by one of the units:
– A handset is replaced on the base unit
or charger.
– Pressing MOFFN on a handset.
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
TG47xxC(en)_1212_ver021.pdf
Talking Call Display
*1
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
– subscribe to a Call Display service of your
– turn this feature on (page 25).
When caller information is received, the
handsets and base unit announce the caller's
name or phone number received from your
service provider/telephone company following
every ring.
R Name pronunciation may vary. This feature
R Call Display service has a limit of how
R The announcement is heard at the same
R If you turn on the answering system and set
R When you receive a call while on the
Phonebook name announcement
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Ringer ID
This feature can help you identify who is
calling by using different ringer tones for
different groups of callers. When adding an
entry to the phonebook, you can assign it to
31

Call Display Service

*1
Handset / Base unit
KX-TG4731/KX-TG4741 series: page 3
service provider/telephone company.
may not pronounce all names correctly.
many characters can be displayed. If the
caller's name is too long:
– the handset may not be able to display
or announce the entire name.
– the base unit may not be able to
announce the entire name.
level as the ringer volume (page 17, 25).
the number of rings "2 rings" (page
38), the unit does not announce the caller
information. If "Toll saver" is selected
and there is a new message, the unit does
not announce the caller information.
phone, the 2nd caller's name is not
announced even if you subscribe to both
Call Display and Visual Call Waiting
services.
2011/12/12 14:19:46
31