Panasonic KX-TG4711C Operating Instructions Manual page 29

Table of Contents

Advertisement

2
Enter the desired name (max. 10
characters; see the character table,
page 20).
R If not required, go to step 3.
3
MSAVEN
4
MbN: Select the desired setting. a
MSELECTN 2 times
5
MOFFN
Call block (Call Display
subscribers only)
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted ("Storing unwanted callers",
page 29).
– the unit receives a call without phone
number ("Blocking incoming calls without
phone number", page 29).
When a call is received, the unit rings for a
short time while the caller is being identified. If
the phone number matches an entry in the call
block list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
R When the unit receives a call from a
number that is stored in the call block list or
a call without a recognized phone number,
the call is logged in the caller list
(page 33) with
after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
an area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
1
MFN CID
2
MbN: Select the entry to be blocked.
R To edit the number, press MEDITN
repeatedly until the phone number
is shown in the 10-digit format.
TG47xxC(en)_1212_ver021.pdf
n By entering phone numbers:
Blocking incoming calls without
phone number
You can reject a call when no phone number
is provided, such as a call just showing
"Unavailable".
1
2
Viewing/editing/erasing call block
numbers
1
2
3
Note:
R When editing, press the desired dial key to
R When viewing, "Block w/o num" is
29
Programming
3
MSAVEN
4
MbN: "Call block" a MSELECTN
5
MbN: "Yes" a MSELECTN
6
Edit the phone number if necessary
(24 digits max.).
7
MSAVEN a MOFFN
1
MMENUN#217 a MADDN
2
Enter the phone number (24 digits
max.).
R To erase a digit, press MCLEARN.
3
MSAVEN a MOFFN
MMENUN#240
MbN: Select the desired setting. a
MSAVEN a MOFFN
MMENUN#217
MbN: Select the desired entry.
R To exit, press MOFFN.
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
MERASEN a MbN: "Yes" a MSELECTN
a MOFFN
add, MCLEARN to erase.
displayed if the blocking incoming calls
without phone number feature is turned on.
To turn the feature off: MERASEN a MCN
a MSAVEN a MOFFN
2011/12/12
14:19:46
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents