Maintaining Your Neato Robot - Neato Robotics botvac connected User Manual

Maintaining your Neato robot

IMPORTANT
Your robot needs regular maintenance
to operate reliably. This means checking/
cleaning the brushes and emptying the dirt
bin after every use or as needed, depending
on your environment. Failure to do this may
cause problems with your robot and impact
your robot's performance and possibly
warranty coverage.
Dirt Bin and Filters
After each use, empty the dirt bin, clean the
airways/openings and filter. To remove the
filter, pinch the handle and pull out.
Use the cleaning tool comb to clean the filter.
Replace the filter
Hair/Fiber
every 1 to 2 months
Cutter
or more frequently
as needed.
Brushes
Remove the guard over the brush by pulling
up on both sides.
PULL UP ON
BOTH SIDES
SIMULTANEOUSLY
Use the cleaning tool blade to cut and
remove hair and comb to remove dirt from
the brush. Clean the brush ends.Replace the
brush and guard over the brush.
Robot Top
Clean the top of the robot and the area
around the laser top with a damp cotton
cloth.
Filter Comb
Sensors
Use a dry cotton
swab to clean the
two drop sensor
windows on the
bottom of the robot.
13