Connecting Using Wireless Lan; Plugging In - Pioneer N-50-K Operating Instructions Manual

02 Connections

Connecting using wireless LAN

Wireless connection to the network is possible through
a wireless LAN connection. Use the separately sold
wireless LAN converter (Pioneer Model No. AS-WL300)
for connection.
DIGITAL OUT DIGITAL IN ADAPTER PORT
(OUTPUT 5V
2 1 Internet
0.1A MAX)
OPTICAL COAXIAL OPTICAL COAXIAL
LAN (10/100) DC OUTPUT DIGITAL IN
for WIRELESS LAN
(OUTPUT 5V
0.6A MAX)
USB
Modem
Wireless LAN
Router
DC 5V Ethernet WPS
Wireless LAN converter (AS-WL300)
(commercially available)
Note
• Use only the furnished accessory connecting cable.
• For instructions on setting the wireless LAN
converter, refer to the operating instructions for the
AS-WL300.
8
En

Plugging in

Important
• Before making or changing the connections,
switch off the power and disconnect the power cord
from the AC outlet.
Caution
• Do not use any power cord other than the one
supplied with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
After you've finished making all connections, plug the
unit into an AC outlet.
To AC outlet
WAN
Power cord
1 Plug the supplied power cord into the
AC IN socket on the back of the unit.
2 Plug the other end into a power outlet.
AC IN