Playable File Formats; Cautions On Use; When Moving This Unit; Place Of Installation - Pioneer N-50-K Operating Instructions Manual

Additional information

Playable file formats

This unit supports the following file formats.
• Note that some file formats are not available for
playback although they are listed as playable file
formats.
• If an attempt is made to play files with unsupported
formats, the sound may be intermittent or be
accompanied by noise. In such cases, confirm that
the file format is compatible with this unit.
• The compatibility of file formats varies depending
on the type of server. Check with your server to
ensure the compatibility of file formats supported
by your server.
• Depending on the server, some file types not
supported by this unit may be converted and
output. For details, consult the server's operating
instructions.
• Internet radio playback may be affected by the
Internet communications environment, and in this
case playback may not be possible even with the file
formats listed here
Category Extension Stream
Sampling 32 kHz to
frequency 48 kHz
Quantizat 16 bit
ion bitrate
MPEG-1
MP3
.mp3 Audio Channel 2 ch
<*1>
Layer-3
Bitrate 8 kbps to
320 kbps
VBR/CBR Supported/
Supported
Category Extension Stream
Sampling 32 kHz to
frequency 48 kHz
(Internet
Radio)
44.1 kHz,
48 kHz,
88.2 kHz,
96 kHz,
192 kHz
— (Digital In
LPCM LPCM
USB)
<*2>
Quantizat 16 bit
ion bitrate (Internet
Radio)
16 bit,
24 bit, 32 bit
(Digital In
USB)
Channel 2 ch
Sampling 32 kHz to
frequency 192 kHz
(Music
Server)
32 kHz to
WAV .wav LPCM 96 kHz
(USB)
Quantizat 16 bit,
ion bitrate 20 bit, 24 bit
Channel 2 ch
Sampling 32 kHz to
frequency 48 kHz
Quantizat 16 bit
ion bitrate
WMA2/7/
WMA .wma Channel 2 ch
8/9/10
Bitrate 5 kbps to
320 kbps
VBR/CBR Supported/
Supported
Category Extension Stream
Sampling 32 kHz to
frequency 48 kHz
Quantizat 16 bit
MPEG-4
ion bitrate
.m4a AAC
.aac MPEG-4
AAC Channel 2 ch
.3gp HE AAC
.3g2 (AAC Plus
Bitrate 16 kbps to
v1/2)
320 kbps
VBR/CBR Supported/
Supported
Sampling 32 kHz to
frequency 192 kHz
(Music
Server)
32 kHz to
FLAC .flac FLAC 96 kHz
(USB)
Quantizat 16 bit, 24 bit
ion bitrate
Channel 2 ch
*1 "MPEG Layer-3 audio decoding technology licensed
from Fraunhofer IIS and Thomson multimedia."
*2 Only streaming data from servers is concerned, so there
is no extension.

Cautions on use

When moving this unit

When moving this unit, be sure to first disconnect the
iPod/iPhone, USB storage device, LAN cable or any
other equipment connected to the unit. Then press
 STANDBY/ON on the remote control, then press
/I STANDBY/ON on this unit, wait for the STANDBY
indicator on the front panel display to turn off, then
unplug the power cord. If a iPod/USB or other device is
left connected during transport, damage or malfunction
may result.

Place of installation

• Choose a stable place near the TV or stereo system
being used with this unit.
• Do not place this unit on top of a TV or color
monitor. Also install it away from cassette decks
and other devices easily affected by magnetic
forces.
Avoid the following types of places:
• Places exposed to direct sunlight
• Humid or poorly ventilated places
• Extremely hot places
• Places exposed to vibrations
• Places in which there is much dust or cigarette
smoke
• Places exposed to soot, steam or heat (kitchens,
etc.)

Do not place objects on this unit

Do not place any objects on top of this unit.
Do not obstruct the ventilation holes
Do not use this unit on shaggy rugs, beds, sofas, etc., or
wrapped in cloth, etc. Doing so will prevent the heat
from dispersing, leading to damage.
Do not expose to heat
Do not place this unit on top of an amplifier or other
component that generates heat. When rack mounting it,
to avoid the heat given off by the amplifier or other audio
component, place it on a shelf below the amplifier.
• Turn off the unit's power when not using it.
• Depending on signal conditions, striped patterns
may appear on a TV screen and noise may enter the
sound of radio broadcasts when the unit's power is
on. If this happens, turn the unit's power off.

Cleaning the product

• Unplug the power cord from the power outlet when
cleaning this unit.
• Clean this unit using a soft cloth. For tough dirt,
apply some neutral detergent diluted in 5 to 6 parts
water to a soft cloth, wring out thoroughly, wipe off
the dirt, then wipe again with a soft, dry cloth.
• Alcohol, thinner, benzene, insecticides, etc., could
cause the print or paint to peel off. Also, leaving
rubber or vinyl products in contact with this unit for
long periods of time could mar the cabinet.
• When using chemical-impregnated wipes, etc.,
read the cautions included with the wipes carefully.
10
25
En