Hunter e33 Operator's Manual page 51

GRAPHIC EXPLANATION OF WARRANTY COVERAGE
Internal fiberglass pan
and fiberglass grid
system are covered by
the five-year limited
warranty.
Footnote 1. All wooden bulkheads, modular components, floors, floor
supports , paneling, trim, coring materials, faceplates, countertops,
fiberglass tabbing, overlays, secondary bonding , sealants , adhesives,
gaskets and epoxies are covered only by the one-year limited warranty.
They are not covered by the five-year limited warranty.
Footnote 2. Voids located within the deck or hulls gelcoat
surface or build laminate are covered only by the one-year
limited warranty. They are not covered by the five-year limited
warranty.
Footnote 3. Keel and rudder are not covered under
the blister warranty. They are not covered under
the one-year or five-year limited warranty's.
Deck and deck floor-pans are covered
only by the one-year limited warranty.
Floor-pan sizes will vary by boat type and
size. They are not covered by the five-
year limited warranty
Internal fiberglass pan
and fiberglass grid
system are covered by
the five-year limited
warranty.
Rudder , keel and
centerboards (small
boats) are excluded
from all warranties.
Keel and centerboard
leaks at the attachment
point are excluded
from all warranties.
Hunter • Limited Warranty
3.9
All fiberglass tabbing, overlays ,
adhesives, epoxy and secondary
bonding are covered only by the
one-year limited warranty. They
are not covered by the five-year
limited warranty.
Hull to deck joint adhesives,
epoxies and sealants are
covered only by the one-year
limited warranty. They are
not covered by the five-year
limited warranty.
The fiberglass hull component
is covered by the five-year
limited warranty. Installed
items such as (but not limited
to) ports, shafting, thru-hulls,
vents and struts are not cov-
ered by the five-year limited
warranty. The rudder and
keel are excluded from all
warranties.