Special Recording Modes; Interval Recording Mode - Canon XF305 Instruction Manual

Special Recording Modes

The camcorder features 4 special recording modes.
Interval recording ([Interval Rec]): The camcorder will automatically record
a pre-defined number of frames at a pre-defined interval. This mode is
suitable for recording subjects with little movement, such as natural
surroundings or plants.
Frame recording ([Frame Rec]): The camcorder will record a pre-defined
number of frames every time you press the START/STOP button. This
mode is suitable for recording stop motion animation.
Slow & fast motion recording ([Slow & Fast Motion]): This mode allows
you to change the shooting frame rate to achieve a slow motion or fast
motion effect during playback.
Pre-recording ([Pre Rec]): The camcorder will start recording
approximately 3 seconds before you press the START/STOP button. This
is especially useful when it is difficult to predict when to start recording.
Operating modes:

Interval Recording Mode

Set the interval and number of frames in advance. Sound is not recorded
in this mode. This mode is not available if [J Other Functions]
Rate/Resolution] is set to [35 Mbps 1440x1080].
Configuring Interval Recording Mode
1 Open the [Interval] submenu.
[J Other Functions]
2 Select the desired interval and then press SET.
• See the following table for the available intervals.
3 Select [Rec Frames], select the desired number of frames and then
press SET.
• Available options are 1, 3, 6 and 9 (2, 6 and 12 if [J Other Functions]
[Frame Rate] is set to [24P] or [60P]).
[Interval Rec] [Interval]
Recording
Special Recording Modes
[J Other Functions]
[Bit
[Interval Rec]
[J Other Functions]
[Interval Rec]
[Rec Frames]
3
[Interval]
[1 sec]
[1]
105