Special Recording Modes
The camera features 4 special recording modes.
Interval recording ([Interval Rec]): A pre-defined number of frames at a pre-defined interval will be recorded
automatically. This mode is suitable for recording subjects with little movement, such as natural surroundings or
plants.
Frame recording ([Frame Rec]): A pre-defined number of frames will be recorded every time you press the
START/STOP button. This mode is suitable for recording stop motion animation.
Slow & fast motion recording ([Slow & Fast Motion]): This mode allows you to change the shooting frame rate to
achieve a slow motion or fast motion effect during playback.
Pre-recording ([Pre Rec]): The camera will start recording approximately 3 seconds before you press the START/
STOP button. This is especially useful when it is difficult to predict when to start recording. Pre-recording is
available only in MXF mode.
Interval Recording Mode
Set the interval and number of frames in advance. Sound is not recorded
in this mode. During 4K and 2K modes, MXF clips will not be recorded
simultaneously on a CF card even if a card is inserted in the camera.
Operating modes:
Configuring Interval Recording Mode
1 Open the [Interval] submenu.
4K/2K/MXF Setup] > [Interval Rec] > [Interval]
[
2 Select the desired interval and then press SET.
• See the following table for the available intervals.
3 Select [Rec Frames], select the desired number of frames and then
press SET.
Available Intervals
1 sec
2 sec
3 sec
10 sec
15 sec
20 sec
4 min
5 min
6 min
Number of Frames Recorded
System priority
4K
2K
59.94i, 29.97P, 23.98P, 24.00P
MXF
59.94P, 50.00i, 50.00P, 25.00P
4 sec
5 sec
6 sec
7 sec
30 sec
40 sec
50 sec
1 min
7 min
8 min
9 min
10 min
Frame rate
Any
8 sec
9 sec
2 min
3 min
Frames recorded
1, 3, 6, 9
2, 6, 12
Special Recording Modes
[
4K/2K/MXF Setup]
[Interval Rec]
[Interval]
[1 sec]
[
4K/2K/MXF Setup]
[Interval Rec]
[Rec Frames]
[1]
105