Configuring The Vectorscope; Configuring The Edge Monitor - Canon XF305 Instruction Manual

Video Scopes
Options
[Line]: Sets the waveform monitor to line display mode.
[Line+Spot]: The waveform of the area in the red frame is displayed in red
on top of the [Line] mode waveform.
[Field]: Sets the waveform monitor to field display mode.
[RGB]: Functions like an RGB parade scope.
[YPbPr]: Functions like a YPbPr parade scope.

Configuring the Vectorscope

The camcorder's vectorscope function offers 2 modes. You can also
change the gain.
1 Open the [Vectorscope] submenu.
[J Other Functions]
2 Select the desired option and then press SET.
• If you do not need to change the gain, you do not need to perform
steps 3 and 4.
3 Open the vectorscope [Gain] submenu.
[J Other Functions]
4 Select [1x] or [5x] and then press SET.
Options
[Spot]: The color signal of the area in the red frame is displayed in red on
top of the [Normal] mode waveform.
[Normal]: Displays the vectorscope.

Configuring the Edge Monitor

Using this video scope allows you to focus with more precision when the
camcorder is in full manual focus or manual focus mode. The edge
monitor features 2 modes.
1 Open the [Edge Monitor] submenu.
[J Other Functions]
2 Select the desired option and then press SET.
[WFM (LCD)] [Vectorscope]
[WFM (LCD)] [Gain] (under [Vectorscope])
[WFM (LCD)] [Edge Monitor]
Recording
[J Other Functions]
[WFM (LCD)]
[Vectorscope]
[Normal]
[J Other Functions]
[WFM (LCD)]
[Edge Monitor]
[Type 1]
3
101