Troubleshooting
Error Messages
Issue
Network error
Address conflict.
Network error
Invalid IP address.
Check LAN cable.
The clock is not adjusted
because an NTP server is
not specified.
138
Operating Instructions
Possible Cause & Solution
•
The network settings are incorrect.
→
Consult your administrator or dealer.
•
The Ethernet cable is not connected correctly.
→
Check whether the Ethernet cable is connected correctly to the unit
(Page 104). If it is not connected correctly, disconnect it, and then
connect it again.
•
An NTP server is not specified.
→
Tap [Enter NTP], and then configure the NTP server settings
(Page 124). Consult your administrator or dealer for details about
the settings for an NTP server.
Document Version 2012-02