Table of Contents
Advertisement
Changing the speaker setting (continued)
CD-DVD500H
Speaker delay setting
The best sound will be achieved by placing the front speakers, centre speaker and
surround speakers at the same distance from the listener.
When some of the speakers are at a different distance from the listener, you can select
a speaker delay to make it seem as though the speaker distances are the same.
(Factory-shipped settings: CENTRE → 0 ms, SURROUND → 5 ms)
If the settings need to be changed due to the type of sound source being played or the
conditions in the room, change them as follows.
1
Press the SP MENU button repeatedly whilst pressing down the SHIFT but-
ton to select "SP DELAY".
2
Within 8 seconds, press the
CENT: To delay the sound from the centre speaker
SURR: To delay the sound from the surround speakers
3
Within 8 seconds, use the
Adjustable range
CENTRE:
0 ms - 5 ms
SURROUND: 0 ms - 15 ms
(Can be changed in 1 ms steps.)
Notes:
1 ms indicates approximately 30 cm (12") added to the current distance between
where the speaker and the listener are located.
If the delay time for the surround speakers is set to a large value, a large sound
space will be created. If it is set to a small value, the sound space will be small and
intimate.
44
ENGLISH
or
button to select "CENT" or "SURR".
or
button to select a value.
Front speaker balance setting
You can adjust the balance between the left and right channels of the front speakers.
1
Press the SP MENU button repeatedly whilst pressing down the SHIFT but-
ton to select "SP LEVEL".
2
Within 8 seconds, press the
or
button to select the front speakers as
illustrated.
3
Within 8 seconds, press the
button to increase the right speaker level
(the left speaker level will decrease), or press the
left speaker level (the right speaker level will decrease).
The speaker balance, as shown in the display, can be changed within the range of
"1" to "10".
Note:
The surround speaker balance will not be changed.
To balance speaker levels:
In step 3, use the
or
button to select "F-SP CEN".
button to increase the
Advertisement
Table of Contents
