Replacing A Headlight Bulb; Adjusting The Headlight Beams - Yamaha FX Nytro FX10Y Owner's Manual

1. Lubrication point
ESU12852

Replacing a headlight bulb

1. Remove the shroud. (See page 44 for re-
moval procedures.)
2. Disconnect the headlight coupler.
3. Remove the bulb holder cover.
1. Headlight coupler
2. Bulb holder cover
4. Unhook the headlight bulb holder, and
then remove the burnt-out bulb.
1. Bulb holder
Periodic maintenance and adjustment
5. Install the new bulb, and then hook the
bulb holder onto the headlight unit.
NOTICE: Keep oil and your hands
away from the glass part of the bulb or
its life and illumination will be affect-
ed. If the glass is oil stained, thor-
oughly clean it with a cloth moistened
with alcohol or lacquer thinner.
1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
6. Install the bulb holder cover, and then
connect the headlight coupler.
7. Install the shroud.
ESU12861

Adjusting the headlight beams

1. Remove the shroud. (See page 44 for re-
moval procedures.)
2. Turn the headlight beam adjusting screw
in or out to adjust the headlight beams.
To lower the headlight beams, turn the
headlight beam adjusting screw in direc-
tion (a). To raise the headlight beams,
turn the headlight beam adjusting screw
in direction (b).
[ECS00621]
67