Handset settings
Answering system settings
Announcement
Outgoing announcements play when calls are answered by the answering
system.
The telephone has a prerecorded outgoing announcement, "Hello. Please
leave a message after the tone." You can use this announcement, or record
your own announcement.
You can record an announcement up to 90 seconds. The system does not
record any announcement shorter than one second.
To play your current outgoing announcement:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press
/SELECT again.
MENU
3. Press
CID or DIR
then press
MENU
4. Press
CID or DIR
then press
MENU
play, press 2. To record, press 7."
5. Press 2 to play the current announcement.
To record a new outgoing announcement:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press
/SELECT again.
MENU
3. Press
CID or DIR
then press
MENU
4. Press
CID or DIR
then press
MENU
play, press 2. To record, press 7."
5. Press 7 to record an announcement, the system
announces, "Record after the tone, press 5 when you
are done."
6. Press 5 when you finish the recording. Your recorded
announcement plays.
To listen to the recorded announcement again, press 2 after playback is
completed.
To record a new announcement, press 7 and follow the above steps.
to scroll to >ANS SYS SETUP,
/SELECT.
to scroll to >ANNOUNCEMENT,
/SELECT, the system announces, "To
to scroll to >ANS SYS SETUP,
/SELECT.
to scroll to >ANNOUNCEMENT,
/SELECT, the system announces, "To
SELECT
SELECT
16
?BOT/!TZTUFN
EJSFDUPSZ
?BOT!TZT!TFUVQ
QMBZ!NTHT
?BOOPVODFNFOU
$!PG!SJOHT
3.QMBZ!4.EFMFUF
6.TUPQ!8.SFDPSE
SFDPSE!BOOD///
6.TUPQ