Record Your Own Announcement - AT&T BL103-3 Quick Start Manual

Initial basic settings
Basic answering system setup via voice guide
You can follow the voice guide to record your own announcement, set the number
of rings and set the message alert tone.
Using the telephone base:
1. Press MENU twice.
2. -> Voice guide -> SELECT.
/
3. Set up the answering system by inputting the designated numbers, as
instructed.
Add a Bluetooth
Note: Your BL103-2/BL103-3/BL103-4 is compatible with Bluetooth version 2.0 or above
devices.
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must first pair and connect your Bluetooth cellular phone or headset with the
telephone base.
Bluetooth wireless technology operates within a short range (up to 30 feet). Keep
the connected device within 15 feet of the telephone base for optimal performance.
To pair and connect a cell phone using the telephone base:
1. -> /
MENU
2. to select Add cellular.
SELECT
3. Press
SELECT
4. Place the cell phone next to the telephone base. Turn on the Bluetooth feature
of your cell phone and search for or add new advices. Once your cell phone finds
your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone
to continue the pairing process.
To pair and connect a headset using the telephone base:
1. -> /
MENU
2. / -> Add headset -> SELECT.
3. Set your headset to discoverable mode -> Press

Record your own announcement

Your outgoing announcement plays when calls are answered by the answering
system. You can use the preset announcement to answer calls, or replace it with
your own recorded announcement.
cell phone/headset
®
-> Bluetooth -> SELECT.
again to turn on the telephone base discoverable mode.
-> Bluetooth ->
SELECT.
SELECT.
12