Descaling; Assembly; Changing The Cleaning Time - Boneco H680 User Manual

AUTOMATIC CLE ANING FUNCTION (CONTINUED)

DESCALING

1. Fill the tank halfway with hot tap water and add two
packets of CalcOff.
2. Start cleaning mode by pressing the
the BONECO H680 keypad for 5 seconds. Change the
duration of cleaning as needed using the
buttons (refer to the column of text on the right).
The appliance then descales itself automatically.
3. Thoroughly wash the evaporator mat with hot water
and dishwashing detergent.
4. Continue to wring out the evaporator mat in clean hot
water until foam no longer forms.

ASSEMBLY

After descaling, the cleaning symbol on the display goes
away; then a flashing symbol indicates that the water in
the appliance has to be replaced:
button on
and
1. Empty the water base and fill the water tank with fresh
tap water.
2. Insert the Ionic Silver Stick
3. Stretch the evaporator mat into the drum.
4. Place the drum into the water base and put the appli-
ance together.

CHANGING THE CLEANING TIME

The default setting for the cleaning time is 4 hours. To
strengthen or shorten the cleaning, adjust the duration of
cleaning using the
• Shorten the duration of cleaning if the BONECO H680
is only slightly dirty.
• Increase the duration of cleaning if the BONECO H680
is located in a room with very dirty air. The maximum
®
into the holder. duration of cleaning is 12 hours.
After cleaning has finished, the cleaning symbol on the
display goes away automatically.
57
and buttons.
en