Boneco H680 Manual
Hide thumbs Also See for H680:
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

H680
MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the H680 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Boneco H680

  • Page 1 H680 MANUAL...
  • Page 3 Instructions for use Instructions d’utilisation Instrucciones para el uso...
  • Page 4 INSTRUCTIONS FOR USE BONECO H680...
  • Page 5: Table Of Contents

    TABLE OF CONTENTS Technical Data “SLEEP” comfort mode “BABY” comfort mode Introduction Relief from allergies Manually regulating humidity and fan level Valuable information about humidity Perfect humidity Items included Controlling humidity Maximum humidification Overview and part names Regulating the fan level Start-up Power mode (P) Safety instructions...
  • Page 6 Drum Evaporator mat (handwashing) Evaporator mat (washing machine) General cleaning Cover Pre-filter HYBRID filter Filter holder Fan blade Housing Particle sensor Assembling the appliance Replacing the HYBRID filter Replacing the HYBRID filter ® Replacing the Ionic Silver Stick Replacing the Ionic Silver Stick ®...
  • Page 7: Technical Data

    TECHNICAL DATA Type designation BONECO H680 Mains voltage 100–240 V, 50–60 Hz Power consumption 30 W Humidity output 1000 g/h* (6.340 gal/day) Air purification performance 190 m /h (112 CFM) (CADR) For rooms up to 100 m (1080 sq ft) Water capacity 10 l (2.64 US gal)
  • Page 8: Introduction

    Its smart control system keeps operating noise makes your eyes and throat feel dry while significantly af- level to a minimum, even allowing you to use the BONECO fecting physical comfort. Not only does this affect adults, H680 in a bedroom or baby's room.
  • Page 9: Overview And Part Names

    OVERVIEW AND PART NAMES Front cover Pre-filter HYBRID filter Filter holder Drum Evaporator mat Ionic Silver Stick ® BONECO H680 Water tank 10 Fragrance container 11 Water base 12 Remote control 13 Fan blade 14 Power supply...
  • Page 10 START-UP AND USE...
  • Page 11: Start-Up

    START-UP SAFETY INSTRUCTIONS FIRST CLEANING FIRST WATER CHANGE Before using the device, carefully read through the Production-related residue on the water tray and water 24 hours after the first use, the “Water change” symbol enclosed safety notes and operating manual and tank may lead to foaming, and thereby to water escaping.
  • Page 12 START-UP (CONTINUED) Remove the front cover. Take off the filter holder along with the filters. Remove the water tank. Pull out the water tray along with the drum. Clean the water tank and water tray. Insert the water tray with the drum into the appli- ance.
  • Page 13 START-UP (CONTINUED) Take off the pre-filter. Insert the water tank filled with tap water. Insert the filter holder. Remove the protective covering of the HYBRID filter. Insert the HYBRID filter Insert the pre-filter. (note the direction the arrow is pointing).
  • Page 14 START-UP (CONTINUED) Reattach the front cover. Connect the power supply to the BONECO H680 first Switch the appliance on with the button. and then to the power outlet.
  • Page 15: Indicators On The Display

    INDICATORS ON THE DISPL AY Overview of all indicators on the display Indicators for air purity (left) and fan level (top) Indicator for humidity (right, middle) and fan level (top) Indica- Indicator Meaning Required action Current or desired humidity Refill the water Fully automated operation Change the water in the appliance Low-noise nighttime mode...
  • Page 16: Keypad And Remote Control

    KEYPAD AND REMOTE CONTROL TWO TYPES OF OPERATION The BONECO H680 can be controlled using the integrated keypad or the included remote control. Operation remains the same in both cases. Keypad on the appliance Remote control Indicator Function Regulating the fan level...
  • Page 17: The "Hybrid" Operating Mode (Air Humidification And Air Purification)

    The BONECO H680 uses the “Hybrid” operating mode After being switched on, the BONECO H680 carries out The BONECO H680 saves all of the settings if you switch when being switched on for the first time: This operating an initial air measurement and the symbol flashes.
  • Page 18: Only Air Humidification / Only Air Purification

    The BONECO H680 can also be used without a HYBRID The BONECO H680 can also be used without water in filter in the “Air humidification” operating mode. When the “Air purification”...
  • Page 19: Selecting The Various Comfort Modes

    “AUTO” COMFORT MODE There are three different comfort modes available in each comfort mode, the BONECO H680 uses all of the of the three “Hybrid”, “Air purification” and “Air humidifi- fan levels between 1 and 6. The preset humidity is 50%.
  • Page 20: Manually Regulating Humidity And Fan Level

    MANUALLY REGUL ATING HUMIDIT Y AND FAN LEVEL PERFECT HUMIDITY CONTROLLING HUMIDITY REGULATING THE FAN LEVEL The recommended humidity level is between 40% and 1. Press the buttons to set the humidity as de- 1. Press the button once. The indicator for the fan 60%.
  • Page 21: Timer Function

    1. Switch on the BONECO H680 using the button. 1. Select the desired operating setting and the desired you determine how long the BONECO H680 should run comfort mode. before it switches off automatically (OFF timer). 2. Select the desired operating setting and the desired comfort mode.
  • Page 22: Display Lock

    DISPL AY LOCK The BONECO H680 display can be set up to prevent ac- ACTIVATING THE DISPLAY LOCK DEACTIVATING THE DISPLAY LOCK cidental entries. Use this function to prevent unintentional 1. Press the button until you hear the indicator tone.
  • Page 23: Using Fragrances

    USING FR AGR ANCES USING FRAGRANCES ADDING FRAGRANCES 3. Insert the fragrance into the fragrance container pro- Inside the BONECO H680 there is a fragrance container 1. Remove the front cover. vided for this. for adding fragrances in the form of essential oils.
  • Page 24 DESCALING AND CLEANING...
  • Page 25: Descaling

    DESCALING For hygienic reasons, the BONECO H680 has to be PREPARING FOR FIRST USE 4. Empty the water base and water tank and remove the cleaned and descaled at regular intervals. An upcoming 1. Remove the front cover and the water tank on the rear Ionic Silver Stick ®...
  • Page 26: Descaling

    2. Start descaling mode by pressing the button on the BONECO H680 keypad for 5 seconds. Change the • Shorten the duration of descaling if the BONECO H680 duration of descaling as needed using the is only slightly dirty. buttons.
  • Page 27: Cleaning The Interior Parts

    Use a cleaning brush and a damp cloth for cleaning. Al- 1. Fill the water tank halfway with hot water and add a 1. Pull the water base out of the BONECO H680. ways add a small amount of dishwashing detergent to small amount of dishwashing detergent.
  • Page 28: Drum

    CLE ANING THE INTERIOR PARTS (CONTINUED) DRUM EVAPORATOR MAT (HANDWASHING) EVAPORATOR MAT (WASHING MACHINE) 1. Take the evaporator mat out of the drum. 1. Thoroughly wash and tumble the evaporator mat with The evaporator mat can also be washed in the wash- hot water and dishwashing detergent.
  • Page 29: General Cleaning

    GENER AL CLE ANING COVER PRE-FILTER HYBRID FILTER 1. Remove the cover. 1. Wash the pre-filter under running water using a clean- The HYBRID filter cannot be cleaned. Dirt is normal and ing brush. shows that the filter is working. 2.
  • Page 30: Filter Holder

    GENER AL CLE ANING (CONTINUED) FILTER HOLDER FAN BLADE HOUSING 1. Remove the filter holder. Never remove the retaining screw in order to take off 1. Clean the inside of the housing with a damp cloth, hot the fan blade! A weight imbalance during reassembly water and dishwashing detergent.
  • Page 31: Particle Sensor

    Once cleaning is complete, you can put the BONECO the room by analyzing a passing air flow. Over time, dirt H680 back together. When doing so, pay attention to how can accumulate and affect measuring accuracy. the evaporator mat fits.
  • Page 32 MAINTENANCE AND TROUBLESHOOTING...
  • Page 33: Replacing The Hybrid Filter

    The HYBRID filter has to be changed after about one year REPLACING THE HYBRID FILTER to ensure that dirt and pollen continue to be filtered from 1. Remove the front cover of the BONECO H680. the air. 2. Take off the pre-filter.
  • Page 34: Replacing The Ionic Silver Stick

    ® You can obtain an Ionic Silver Stick from your BONECO ® specialist dealer or the BONECO online store at: 6. Insert the new Ionic Silver Stick www.shop.boneco.com 7. Put the parts back together by following the steps in reverse order.
  • Page 35: Malfunctions And Troubleshooting

    MALFUNCTIONS AND TROUBLESHOOTING Problem Possible cause Action Air has an unpleasant odor Stagnant water in the tank and water base Empty and thoroughly clean the appliance No improvement in air Particle sensor is dirty Clean the particle sensor quality Open windows or doors Close windows and doors Display shows Error E2 Fan blade blocked or motor is defective...
  • Page 36 INSTRUCTIONS D’UTILISATION BONECO H680...
  • Page 37 SOMMAIRE Spécifications techniques Mode «SLEEP» Mode «BABY» Introduction Soulagement d’allergies Réglage manuel de l’humidité de l’air et du degré de ventilation Bon à savoir au sujet de l’humidité de l’air L’humidité de l’air optimale Contenu de la livraison Réglage de l’humidité de l’air Humidification maximale Vue d’ensemble et désignation des pièces Réglage du degré...
  • Page 38 Cylindre Tapis d’évaporation (lavage à la main) Tapis d’évaporation (lavage en machine) Nettoyage général Couvercle Préfiltre Filtre HYBRID Porte-filtre Pales du ventilateur Boîtier Capteur de particules Montage de l’appareil Remplacement du filtre HYBRID Remplacement du filtre HYBRID ® Remplacer l’Ionic Silver Stick Remplacement du bâtonnet Ionic Silver Stick ®...
  • Page 39: Spécifications Techniques

    SPÉCIFICATIONS TECHNIQUES Désignation de modèle BONECO H680 Tension de réseau 100–240 V, 50–60 Hz Puissance absorbée 30 W Puissance d’humidification 1 000 g/h* Puissance de purification de l’air 190 m /h (taux de distribution d’air pur, CADR) Pour des locaux d’une superficie max. de 100 m Capacité...
  • Page 40: Introduction

    La sécheresse de l’air ambiant cause en hi- même utiliser le BONECO H680 dans une chambre à cou- ver des fendillements de la peau et des démangeaisons cher ou une chambre d’enfant.
  • Page 41: Vue D'ensemble Et Désignation Des Pièces

    VUE D’ENSEMBLE ET DÉSIGNATION DES PIÈCES Couvercle frontal Préfiltre Filtre HYBRID Porte-filtre Cylindre Tapis d’évaporation Ionic Silver Stick ® BONECO H680 Réservoir d’eau 10 Récipient pour subs- tances odorantes 11 Bac à eau 12 Télécommande 13 Pales du ventilateur 14 Alimentation électrique...
  • Page 42 MISE EN SERVICE ET UTILISATION...
  • Page 43: Mise En Service

    MISE EN SERVICE CONSIGNES DE SÉCURITÉ PREMIER NETTOYAGE PREMIER CHANGEMENT D’EAU Lisez attentivement les consignes de sécurité jointes Les résidus liés à la production sur le bac à eau et le 24 heures après la première utilisation, l’icône «Change- et le mode d’emploi avant l’utilisation de l’appareil et réservoir d’eau peuvent provoquer une formation de ment d’eau»...
  • Page 44 MISE EN SERVICE (SUITE) Enlevez le couvercle frontal. Ôtez le porte-filtre ainsi que les filtres. Retirez le réservoir d’eau. Retirez le bac à eau avec le cylindre. Nettoyez le réservoir d’eau et le bac à eau. Insérez le bac à eau avec le cylindre dans l’appareil.
  • Page 45 MISE EN SERVICE (SUITE) Enlevez le préfiltre. Insérez le réservoir d’eau rempli avec l’eau du robi- Insérez le porte-filtre. net. Retirez la feuille de protection du filtre HYBRID. Insérez le filtre HYBRID Insérez le préfiltre. (dans le sens de la flèche).
  • Page 46 Mettez en place le couvercle frontal. Connectez l’alimentation électrique d’abord au Allumez l’appareil en appuyant sur la touche BONECO H680, puis à la prise secteur.
  • Page 47: Affichage À L'écran

    AFFICHAGE À L’ÉCR AN Vue d’ensemble de tous les affichages à l’écran Affichages pour la pureté de l’air (à gauche) et le degré Affichages pour l’humidité de l’air (à droite, au centre) et de ventilation (en haut) le degré de ventilation (en haut) Affi- Affichage Signification...
  • Page 48: Clavier Et Télécommande

    CL AVIER ET TÉLÉCOMMANDE DEUX TYPES DE COMMANDE La commande du BONECO H680 s’effectue au moyen du clavier intégré ou de la télécommande fournie ; l’utilisa- tion de l’appareil est la même. Clavier de l’appareil Télécommande Affichage Fonction Réglage du degré de ventilation Passage d’un mode à...
  • Page 49: Mode Opératoire «Hybrid» (Humidification De L'air Et Purification De L'air)

    AFFICHAGE DE LA QUALITÉ DE L’AIR RÉGLAGES DE BASE MARCHE Après la mise en marche, le BONECO H680 exécute une Le BONECO H680 enregistre tous les réglages, quand Le BONECO H680 utilise lors de la première mise en première mesure de l’air et l’icône clignote.
  • Page 50: Seulement Humidification De L'air / Seulement Purification De L'air

    En mode opératoire «Humidification de l’air», le BONECO En mode opératoire «Purification de l’air», le BONECO H680 est également utilisable sans filtre HYBRID. Lors du H680 est également utilisable sans eau. Lors du passage passage en mode opératoire «Hybrid» ou «Purification de en mode opératoire «Hybrid»...
  • Page 51: Sélection Des Divers Modes

    MODE «AUTO» Dans les trois modes opératoires «Hybrid», «Purification En mode le BONECO H680 utilise tous les degrés de l’air» et «Humidification de l’air», trois modes diffé- de ventilation de 1 à 6. L’humidité de l’air préréglée est rents sont disponibles pour la sélection  : de 50 %.
  • Page 52: Réglage Manuel De L'humidité De L'air Et Du Degré De Ventilation

    RÉGL AGE MANUEL DE L’HUMIDITÉ DE L’AIR ET DU DEGRÉ DE VENTIL ATION L’HUMIDITÉ DE L’AIR OPTIMALE RÉGLAGE DE L’HUMIDITÉ DE L’AIR RÉGLAGE DU DEGRÉ DE VENTILATION L’humidité de l’air recommandée est comprise entre 40 % 1. Appuyez sur les touches pour régler l’humidité...
  • Page 53: Fonction Minuteur

    RÉGLAGE DU MINUTEUR D’ARRÊT (OFF-TIMER) RÉGLAGE DU MINUTEUR DE MISE EN MARCHE des opératoires et avec tous les modes. Avec la fonction 1. Mettez le BONECO H680 en marche avec la touche . (ON-TIMER) Minuteur, vous pouvez déterminer combien de temps le 1.
  • Page 54: Verrouillage De L'écran

    VERROUILL AGE DE L’ÉCR AN Il est possible de protéger l’écran du BONECO H680 pour ACTIVATION DU VERROUILLAGE DE L’ÉCRAN DÉSACTIVATION DU VERROUILLAGE DE L’ÉCRAN éviter qu’il ne soit utilisé par mégarde. Vous pouvez par 1. Appuyez sur la touche jusqu’à...
  • Page 55: Utilisation De Substances Odorantes

    UTILISATION DE SUBSTANCES ODOR ANTES UTILISATION DE SUBSTANCES ODORANTES AJOUT DE SUBSTANCES ODORANTES 3. Ajoutez la substance odorante dans le récipient prévu Le BONECO H680 renferme le récipient pour substances 1. Enlevez le couvercle frontal. à cet effet. odorantes permettant l’ajout de substances odorantes sous forme d’huiles essentielles.
  • Page 56 DÉTARTRAGE ET NETTOYAGE...
  • Page 57: Détartrage

    DÉTARTR AGE Pour des raisons d’hygiène, le BONECO H680 doit être ACTIONS PRÉPARATOIRES 4. Videz le bac à eau ainsi que le réservoir d’eau et enle- nettoyé et détartré à intervalles réguliers. Un nettoyage 1. Enlevez le couvercle frontal et le réservoir d’eau situé...
  • Page 58: Détartrage

    CalcOff. détartrage avec les touches 2. Démarrez le mode de détartrage en appuyant pendant • Réduisez la durée de détartrage si le BONECO H680 5  secondes sur la touche du panneau de com- n’est que légèrement sale.
  • Page 59: Nettoyage De L'intérieur

    3. Nettoyez aussi le couvercle. Pour le nettoyage, n’utilisez pas d’alcool ni de produit de nettoyage agressif. Il ne faut pas nettoyer le BONECO H680 dans un lave-vaisselle. Les températures élevées déforme- raient les pièces de l’appareil et les rendraient inuti- lisables.
  • Page 60: Cylindre

    NET TOYAGE DE L’INTÉRIEUR (SUITE) CYLINDRE TAPIS D’ÉVAPORATION (LAVAGE À LA MAIN) TAPIS D’ÉVAPORATION (LAVAGE EN MACHINE) 1. Retirez le tapis d’évaporation du cylindre. 1. Lavez à fond et foulez le tapis d’évaporation en utilisant Le tapis d’évaporation peut également être lavé en ma- de l’eau chaude et un liquide vaisselle.
  • Page 61: Nettoyage Général

    NET TOYAGE GÉNÉR AL COUVERCLE PRÉFILTRE FILTRE HYBRID 1. Enlevez le couvercle. 1. Nettoyez le préfiltre à l’eau courante au moyen d’une Il ne faut pas nettoyer le filtre HYBRID. La présence de brosse à vaisselle. salissures est normale et prouve que le filtre est efficace. 2.
  • Page 62: Porte-Filtre

    NET TOYAGE GÉNÉR AL (SUITE) PORTE-FILTRE PALES DU VENTILATEUR BOÎTIER 1. Enlevez le porte-filtre. Lors du retrait des pales du ventilateur, n’ôtez jamais 1. Nettoyez l’intérieur du boîtier avec un chiffon humide, la vis de fixation  ! Lors du remontage, un balourd de l’eau chaude et du liquide vaisselle.
  • Page 63: Capteur De Particules

    Quand le nettoyage est terminé, vous pouvez remonter le biant en analysant le flux d’air qui passe devant lui. Au BONECO H680. Ce faisant, faites attention à la forme du cours du temps, un dépôt de salissures peut perturber tapis d’évaporation.
  • Page 64 MAINTENANCE ET CORRECTION DES ERREURS...
  • Page 65: Remplacement Du Filtre Hybrid

    Après environ un an, il faut remplacer le filtre HYBRID REMPLACEMENT DU FILTRE HYBRID pour garantir que l’air est toujours bien purifié des impu- 1. Enlevez le couvercle frontal du BONECO H680. retés et du pollen. 2. Enlevez le préfiltre.
  • Page 66: Remplacer L'ionic Silver Stick

    Pour vous procurer le bâtonnet Ionic Silver Stick , adres- 6. Mettez en place l’Ionic Silver Stick neuf. sez-vous à votre revendeur spécialisé BONECO, ou à la boutique en ligne BONECO à l’adresse: 7. Remontez les pièces en procédant dans l’ordre inverse. www.shop.boneco.com.
  • Page 67: Dysfonctionnements Et Correction Des Erreurs

    DYSFONCTIONNEMENTS ET CORRECTION DES ERREURS Problème Cause possible Mesure à prendre L’air sent mauvais Eau stagnante dans le réservoir et dans le bac à eau Videz l’appareil et nettoyez-le complètement Aucune amélioration de la Le capteur de particules est sale Nettoyage du capteur de particules qualité...
  • Page 68 INSTRUCCIONES DE USO BONECO H680...
  • Page 69 ÍNDICE Datos técnicos Modo “SLEEP” Modo “BABY” Instrucciones Alivio para las alergias Regulación manual de la humedad del aire y la potencia del ventilador Importancia de la humedad del aire Humedad del aire óptima Contenido Regulación de la humedad del aire Humidificación máxima Vista de conjunto y denominación de los componentes Regulación de la potencia del ventilador...
  • Page 70 Tambor Placa de evaporación (lavado a mano) Placa de evaporación (lavadora) Limpieza general Cubierta Filtro previo Filtro híbrido Soporte del filtro Aletas del ventilador Carcasa Sensor de partículas Montaje del aparato Sustitución del filtro híbrido Sustitución del filtro híbrido ® Sustitución del Ionic Silver Stick Sustitución del Ionic Silver Stick ®...
  • Page 71: Datos Técnicos

    DATOS TÉCNICOS Denominación del modelo BONECO H680 Tensión de la red 100-240 V, 50-60 Hz Consumo de energía 30 W Capacidad de humidificación 1000 g/h* Capacidad de purificación del aire 190 m /h (CADR) Para estancias de hasta 100 m...
  • Page 72: Instrucciones

    BONECO H680 en el dormitorio o en el disminuye claramente. Y no solo para adultos, sino sobre cuarto de los niños.
  • Page 73: Vista De Conjunto Y Denominación De Los Componentes

    Filtro híbrido Soporte del filtro Tambor Placa de evaporación Ionic Silver Stick ® BONECO H680 Depósito de agua 10 Depósito difusor de aroma 11 Placa para el agua 12 Mando a distancia 13 Aletas del ventilador 14 Fuente de alimentación...
  • Page 74 PUESTA EN MARCHA Y UTILIZACIÓN...
  • Page 75: Puesta En Marcha

    PUESTA EN MARCHA INDICACIONES DE SEGURIDAD PRIMERA LIMPIEZA PRIMER CAMBIO DE AGUA Lea las instrucciones de seguridad y funcionamiento Los residuos relacionados con la producción en el reci- Transcurridas 24 horas desde el primer uso se ilumina el adjuntas antes de utilizar el aparato y guárdelo para piente para agua y el depósito de agua pueden formar una símbolo “cambio de agua”: un uso posterior.
  • Page 76 PUESTA EN MARCHA (CONTINUACIÓN) Retire la cubierta frontal. Quite el filtro junto con su soporte. Extraiga el depósito de agua. Extraiga el recipiente para agua junto con el tambor. Limpie el depósito de agua y el recipiente para agua. Coloque el recipiente para agua junto con el tambor en el aparato.
  • Page 77 PUESTA EN MARCHA (CONTINUACIÓN) Retire el filtro previo. Inserte el depósito de agua lleno de agua del grifo. Inserte el soporte del filtro. Retire la cubierta protectora del filtro híbrido. Vuelva a colocar el filtro híbrido Inserte el filtro previo. (en el sentido de la flecha).
  • Page 78 PUESTA EN MARCHA (CONTINUACIÓN) Vuelva a colocar la cubierta frontal. Conecte primero la fuente de alimentación al BO- Encienda el aparato pulsando la tecla NECO H680 y a continuación a la toma de corriente.
  • Page 79: Indicaciones En El Panel

    INDICACIONES EN EL PANEL Vista general con todas las indicaciones del panel Indicación de purificación de aire (izquierda) y potencia Indicación de humedad del aire (centro, derecha) y po- del ventilador (arriba) tencia del ventilador (arriba) Indica- Indicación Significado Acción requerida ción Humedad del aire actual o deseada Rellenar agua...
  • Page 80: Panel De Teclas Y Mando A Distancia

    PANEL DE TECL AS Y MANDO A DISTANCIA DOS FORMAS DE MANEJAR EL APARATO El BONECO H680 puede manejarse mediante el panel de teclas integrado o mediante el mando a distancia. Las teclas son las mismas. Panel de teclas del aparato...
  • Page 81: Régimen De Funcionamiento "Híbrido" (Purificación Y Humidificación)

    PRIMERA VEZ Una vez encendido, el BONECO H680 realiza una primera El BONECO H680 guarda todos los ajustes efectuados El BONECO H680 se encuentra en el régimen de funcio- medición del aire, y el símbolo parpadea. Cuando cuando se apaga el aparato pulsando la tecla namiento “Híbrido”...
  • Page 82: Solo Humidificación/Solo Purificación

    En el régimen de funcionamiento “Humidificación” el BO- En el régimen de funcionamiento “Purificación” el BO- NECO H680 también puede funcionar sin filtro híbrido. Al NECO H680 también puede funcionar sin agua. Al volver volver al régimen de funcionamiento “Híbrido” o “Purifi- al régimen de funcionamiento “Híbrido”...
  • Page 83: Selección De Modo

    MODO “AUTO” Cada uno de los tres regímenes de funcionamiento “Hí- En el modo , el BONECO H680 utiliza todas las po- brido”, “Purificación” y “Humidificación” permite elegir tencias del ventilador entre 1 y 6. La humedad del aire entre tres modos diferentes: predeterminada es del 50 %.
  • Page 84: Regulación Manual De La Humedad Del Aire Y La Potencia Del Ventilador

    REGUL ACIÓN MANUAL DE L A HUMEDAD DEL AIRE Y L A POTENCIA DEL VENTIL ADOR HUMEDAD DEL AIRE ÓPTIMA REGULACIÓN DE LA HUMEDAD DEL AIRE REGULACIÓN DE LA POTENCIA DEL VENTILADOR La humedad del aire recomendada se sitúa entre un 40 % 1.
  • Page 85: Función De Temporizador

    BONECO H680 por ejemplo antes de su regreso a casa, de forma que cuando llegue el am- El aparato funcionará durante el tiempo establecido y a El BONECO H680 se encenderá al finalizar este tiempo y biente ya sea óptimo. continuación se apagará.
  • Page 86: Bloqueo Del Panel

    BLOQUEO DEL PANEL El panel del BONECO H680 puede protegerse contra ACTIVACIÓN DEL BLOQUEO DEL PANEL DESACTIVACIÓN DEL BLOQUEO DEL PANEL manipulaciones accidentales. Utilice esta función, por 1. Pulse la tecla hasta que suene una señal acústica. 1. Pulse la tecla hasta que suene una señal acústica.
  • Page 87: Uso De Sustancias Aromáticas

    USO DE SUSTANCIAS AROMÁTICAS AÑADIR SUSTANCIAS AROMÁTICAS 3. Añada la sustancia aromática en el depósito difusor de Dentro del BONECO H680 se encuentra el depósito difu- 1. Retire la cubierta frontal. aroma correspondiente. sor de aroma para la adición de sustancias aromáticas en forma de aceites etéreos.
  • Page 88 DESCALCIFICACIÓN Y LIMPIEZA...
  • Page 89: Descalcificación

    DESCALCIFICACIÓN Por motivos de higiene, el BONECO H680 debe someterse PREPARACIÓN 4. Vacíe el agua del recipiente y del depósito de agua y a operaciones de descalcificación y limpieza de forma 1. Retire la cubierta frontal y el depósito de agua de la retire el Ionic Silver Stick ®...
  • Page 90: Descalcificación

    2. Inicie la descalcificación pulsando la tecla del BO- NECO H680 durante 5 s. Si lo desea, puede cambiar la duración de la descalcificación con las teclas • Reduzca el tiempo de descalcificación solamente si el BONECO H680 está...
  • Page 91: Limpieza Del Interior

    Utilice un cepillo limpiador y un paño húmedo para lim- 1. Llene el depósito de agua hasta la mitad con agua tibia 1. Extraiga la placa para el agua del BONECO H680. piar el aparato. Añada siempre una pequeña cantidad de y añada una pequeña cantidad de lavavajillas.
  • Page 92: Tambor

    LIMPIEZ A DEL INTERIOR (CONTINUACIÓN) TAMBOR PLACA DE EVAPORACIÓN (LAVADO A MANO) PLACA DE EVAPORACIÓN (LAVADORA) 1. Retire la placa de evaporación del tambor. 1. Lave bien la placa de evaporación con agua tibia y la- La placa de evaporación también puede lavarse en la la- vavajillas.
  • Page 93: Limpieza General

    LIMPIEZ A GENER AL CUBIERTA FILTRO PREVIO FILTRO HÍBRIDO 1. Retire la cubierta. 1. Lave el filtro previo con un cepillo limpiador debajo del El filtro híbrido no puede limpiarse. Es normal que pre- grifo. sente suciedad, lo cual demuestra la eficacia del filtro. 2.
  • Page 94: Soporte Del Filtro

    LIMPIEZ A GENER AL (CONTINUACIÓN) SOPORTE DEL FILTRO ALETAS DEL VENTILADOR CARCASA 1. Extraiga el soporte del filtro. No quite nunca el tornillo de sujeción para retirar el 1. Limpie el interior de la carcasa con un paño húmedo, ventilador. Al volver a montarlo puede producirse un agua tibia y detergente para lavavajillas.
  • Page 95: Sensor De Partículas

    Una vez finalizada la limpieza, puede volver a montarse habitación mediante el análisis de la corriente de aire. el BONECO H680. Tenga en cuenta el ajuste de la placa Con el paso del tiempo puede acumularse suciedad que de evaporación.
  • Page 96 MANTENIMIENTO Y SOLUCIÓN DE PROBLEMAS...
  • Page 97: Sustitución Del Filtro Híbrido

    El filtro híbrido debe sustituirse al cabo de un año apro- SUSTITUCIÓN DEL FILTRO HÍBRIDO ximadamente a fin de que el proceso de purificación del 1. Retire la cubierta frontal del BONECO H680. aire pueda continuar funcionando correctamente. 2. Retire el filtro previo.
  • Page 98: Sustitución Del Ionic Silver Stick

    Podrá adquirir un nuevo Ionic Silver Stick a través de su ® distribuidor BONECO o en la tienda en línea de BONECO: 6. Coloque el nuevo Ionic Silver Stick www.shop.boneco.com. 7. Vuelva a colocar todas las piezas siguiendo el orden inverso.
  • Page 99: Posibles Problemas Y Soluciones

    POSIBLES PROBLEMAS Y SOLUCIONES Problema Posible causa Solución El olor del aire es desa- Hay agua estancada en el depósito y en la placa para el Vacíe el aparato y límpielo en su totalidad gradable agua La calidad del aire no El sensor de partículas está...
  • Page 100 Please check our website www.boneco.us for further information. B O N E C O is a registered trademark of B O N E C O AG, Switzerland...

Table of Contents