Peripheral Setup - ECS P6VEMD User Manual

controller is used, the onboard IDE controller is automatically disabled.
OffBoard PCI IDE Primary IRQ (Disabled)
This option specifies the PCI interrupt used by the primary IDE channel on the
offboard PCI IDE controller.
OffBoard PCI IDE Secondary IRQ (Disabled)
This option specifies the PCI interrupt used by the secondary IDE channel on
the offboard PCI IDE controller.

Peripheral Setup

The Peripheral Setup menu describes I/O resources assignment for all of the
on-board peripheral devices.
Onboard FDC (Auto)
If you want to install a different add-on super I/O card to connect floppy drives,
set this field to disabled. Otherwise, set it to Auto to let BIOS automatically
determine if the floppy controller should be enabled.
Onboard Serial PortA/PortB (3F8/COM1)
These fields control the resource assignments of two on-board serial inter-
faces SIO1 and SIO2. The following lists show current options in On Board
Serial Port A/ Port B:
Auto Cannot set serial I/O resources by manual operation
Disabled Indicates on-board COM port function is ineffective
3F8h/COM1
Assign I/O address 3F8h to COM1
2F8h/COM2
Assign I/O address 2F8h to COM2
3E8h/COM3 Assign I/O address 3E8h to COM3
2E8h/COM4 Assign I/O address 2E8h to COM4
35