ECS P6VEMD User Manual page 45

WOM1: Wake On Modem
If you have installed a modem, use the cable provided with the modem to plug
into the mainboard WOM1 connector. This enables the Wake On Modem
(WOM1 feature. When your system is in a power-saving mode, any modem
signal automatically resumes the system. You must enable this item using the
Power Management page of the Setup Utility. See Chapter 3 for more infor-
mation.
Pin Signal Name
1 5VSB
2 GND
3 Ring#
Function
+5V stand by power
Ground
Wake up signal (low active)
21