Status Menu Error Codes - Epson WF-4630 User Manual

LCD screen message
Communication error
Authentication error
DNS error
Recovery mode
Parent topic:
Related references
Paper Jam Problems Inside the Product
Paper Jam Problems in the Cassette
Paper Jam Problems in the Duplexer (Rear Cover)
Document Jams in the Automatic Document Feeder

Status Menu Error Codes

Where to Get Help
Related tasks
Replacing the Maintenance Box
Connecting a Telephone or Answering Machine
Related topics
Loading Paper
Wi-Fi or Wired Networking
Status Menu Error Codes
If a job does not complete successfully, you can check the error code. Press the Status button, then
select Job History and locate the incomplete job. Select the job to display the error code and additional
information.
Code
001
101
Condition/solution
See the link below to the Error Code section in this manual.
An error has occurred during firmware updating. Connect your
product using a USB cable and try downloading the Firmware
Update from the Epson support site. If you still need help,
contact Epson for support.
Solving Problems
Condition/solution
The product was turned off by a power failure.
Memory is full. Reduce the size of the print job.
264