Notices; General Product Safety Instructions - Epson WF-4630 User Manual

Notices

Check these sections for important notices about your product.
Note: Epson offers a recycling program for end of life products. Please go to
how to return your products for proper disposal.
Epson offers postage-paid ink cartridge recycling with an environmental incentive. Go to
epson.com/cartridgereturn

General Product Safety Instructions

FCC Compliance Statement
Software Notice
Trademarks
Copyright Notice
General Product Safety Instructions
• Be sure to follow all warnings and instructions marked on the product.
• Use only the type of power source indicated on the product's label.
• Use only the power cord that comes with the product. Use of another cord may cause fires or shock.
Do not use the cord with any other equipment.
• Place the product near a wall outlet where the plug can be easily unplugged.
• Avoid plugging the product into an outlet on the same circuit as a photo copier or air control system
that regularly switches on and off, or on an outlet controlled by a wall switch or timer.
• Do not let the power cord become damaged or frayed. Place it to avoid abrasions, cuts, fraying,
crimping, and kinking. Do not place objects on top of it and do not allow it to be stepped on or run over.
Be careful to keep the cord straight at each end.
• If you use an extension cord with the product, make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total
ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere
rating.
• Always turn off the product using the power button, and wait until the power light stops flashing before
unplugging the product or cutting off power to the electrical outlet.
• If you will not be using the product for a long period, unplug the power cord from the electrical outlet.
(U.S.) or epson.ca/cartridgereturn
321
this site for information on
(Canada) to learn more.