IBM Netfinity 6000R Installation Manual page 25

Note: The illustrations in this document might differ slightly from your hardware.
Error LEDs
Memory slot 5
Attention: When you handle Electrostatic Discharge-Sensitive devices (ESD), take
precautions to avoid damage from static electricity. For details on handling these
devices, refer to the following Web site and use a search term of ESD:
http://www.ibm.com/
To install a memory module:
1. Review the information in "Safety" on page v.
2. Turn off the server and remove the power cords.
3. Remove the top cover.
4. Remove the memory board assembly from the server.
5. Select the connectors in which you want to install the DIMMs.
6. Install the DIMMs in the connectors.
7. Replace the memory board assembly in the server.
8. Install the top cover.
9. Connect all cables and power cords.
Memory slot 1
Memory slot 13
Memory slot 9
Error LEDs
Chapter 2. Installing options
13