Toshiba Magnia 550D User Manual page 66

System Configuration Setup
LOAD FAIL-SAFE DEFAULTS - Do not use this menu. Otherwise, the server may
operate incorrectly. If you use it and change values, see
defaults on page 82.
LOAD OPTIMIZED DEFAULTS - Returns the BIOS settings to the default values.
Other settings are needed for this function. See
on page 82.
INTEGRATED PERIPHERALS - Sets the operation modes for I/O and HDD.
HARDWARE MONITOR AND MISC SETUP - Specifies whether to automatically
monitor and set the ACPI shut down temperature in the server and monitor the
operating condition of the cooling fan.
SUPERVISOR PASSWORD - Sets the supervisor password. The supervisor
password is the higher-level password of the two passwords normally used on the
system. On most systems, when the supervisor password has been set, it must be
entered in order to access the BIOS setup program, or to change the user password.
USER PASSWORD - Sets the user password. The user password is the lower-level
password of the two passwords normally used on the system. The user password
allows the system to be booted, but does not allow access to the BIOS setup
program. The supervisor password must be used to enter the BIOS setup program.
HINT: Entering the BIOS requires the use of a password. If a user password is
used, only the user password can be changed in the BIOS. If a supervisor
password is used, all BIOS functions are available.
IDE HDD AUTO DETECTION - Automatically detects HDDs connected to the IDE
BUS.
SAVE and EXIT SETUP - Saves the settings to CMOS and exits Setup.
EXIT WITHOUT SAVING - Abandons all changes and exits Setup.
How to return to the Toshiba
How to return to the Toshiba defaults
66
Setup