Toshiba Magnia 550D User Manual page 191

Management Software
If you click the Edit button while the Filter Settings tab is active, the following screen
displays.
Item
Logfile
Event Type
Event Source
Event ID
Description
Keyword
Data Filter Bytes
Data Filter Offset
Event Merging
Interval
Clear
Set
Select the type of log file.
Select the target event type(s).
Specify one or more types. At least one type must be
selected.
Specify the source name(s).
When specifying two or more sources, separate them with a
comma ",". Wild cards ("*" and" ?") can be used. If no source
is specified, all sources are applicable. Source name(s) can
be specified with up to 128 characters.
Specify the event ID. When specifying two or more event IDs,
separate them with a comma ",". Up to 16 event IDs can be
specified. Use a hyphen "-" to specify a range. If no event ID is
specified, all event IDs are applicable.
Specify the description keyword.
The keyword can be specified with up to 64 characters.
Specify the data filter bytes in hexadecimal.
Up to 64 characters of data can be specified.
When specifying a data filter bytes, specify the data filter offset
position in decimal notation.
If no data offset is specified, all offsets are applicable.
Specify the "Event Merging Interval" in seconds.
Resets the data to their initial state.
Sets the specified data.
Explanation
191
Using HarnessEye/web