Table of Contents
Advertisement
Connecting Components
5
Remove the screws securing the 5.25-inch shield cover and store the cover for
possible reuse.
Removing the shield
6
Insert the SCSI HDD into the slot and secure it with two screws.
Inserting the SCSI hard disk drive
7
Connect the power and SCSI cable to the SCSI HDD.
8
Connect the SCSI cable to the SCSI adapter.
SCSI cable
Connecting the SCSI cables
9
Reinstall the side panel and bezel. For instructions, see
server panels
on page 33.
Adding a SCSI hard disk drive
Removing and replacing the
54
Advertisement
Table of Contents
Troubleshooting
