Applying The Cuff - HoMedics BPW-370BT Instruction Manual

Pairing your device running Android:
Android 4.2 and earlier
1. On your mobile device,
go into SETTINGS.
2. In SETTINGS, turn
Bluetooth ON and
select HOMEDICSBPW
Android 4.3 and later
1. Open the HoMedics App
on your device.
2. Take a reading with your
blood pressure monitor.
The App will automatically
accept the new readings.
Note:
• Be sure to select the correct User
on the monitor before your blood
pressure measurement begins.
• User 1 on the monitor transmits
to User 1 on the HoMedics App.
• User 2 on the monitor transmits
to User 2 on the HoMedics App.
• For more information on transmitting
readings, see page 20.
15

APPLYING THE CUFF

1. Remove all watches, wrist jewelry, etc.
prior to attaching the wrist monitor.
Clothing sleeves should be rolled up
and the cuff should be wrapped around
bare skin for correct measurements.
2. Apply cuff to left wrist with palm facing
up as shown in Fig. A.
3. Make sure the edge of the cuff is about
1/4"~1/2" (1 cm) from the palm as
shown in Fig. B.
4. In order to ensure accurate
measurements, fasten the hook and
loop strap securely around your wrist so
there is no extra space between the cuff
and the wrist. If the cuff is not wrapped
tight enough, the measurement values
will not be accurate.
5. If your physician has diagnosed you
with poor circulation in your left arm,
place the cuff around your right wrist as
shown in Fig. C.
Note:
• This device should not be used when
your wrist is wounded or injured.
• If it is not possible to use the cuff on your left wrist,
it can also be used on your right wrist. However, all
measurements should be made using the same wrist.
Fig. A
Fig. B
Fig. C
16