Transmit Readings To Mobile Device - HoMedics BPW-370BT Instruction Manual

2. With the cuff wrapped around your wrist, press the START/
STOP button. Do not start the measurement process
unless it is wrapped around your wrist. All digits will light up,
checking the display functions. The checking procedure will
be completed after about 3 seconds.
START
STOP
3. After all symbols disappear, the display will show "00". The
monitor is "Ready to Measure" and will automatically
inflate the cuff to begin measurement.
4. When the measurement is completed, the cuff will deflate
entirely and systolic pressure, diastolic pressure and
pulse will be shown simultaneously on the LCD screen.
then automatically stored into
The measurement is
memory.
Note:
• This monitor automatically turns off
approximately 30 seconds after last
operation. You may also press the
START/STOP button to turn the unit
off or to interrupt measurements.
19

TRANSMIT READINGS TO MOBILE DEVICE

This monitor syncs your blood pressure readings to the
HoMedics App that is free to download on the App Store
on Google Play™. Make sure you have this App downloaded
and installed on your mobile device before trying to transmit
your blood pressure measurements.
While transmitting the reading to your Bluetooth
• " " will be displayed on the screen and the Bluetooth
indicator will illuminate.
At the conclusion of data transmitting, the App will display the
following:
• When a reading is successfully added it will show a
summary of each reading with the ability to enter notes on
each reading.
SM
®
Device:
BLUETOOTH
Indicator
20
and