Removing SD Memory Card
1
Tilt the viewfinder upwards, and open the
SD Memory Card slot cover by sliding it to
the left.
•
Ensure that the SD Memory Card access
lamp is not flashing orange before opening
the cover.
2
Press the center of the SD Memory Card so
that it pops out slightly, and pull the card
straight outwards.
SD Memory Card
access lamp
2
•
Do not remove the SD Memory Card or switch off
the power in the following circumstances. Doing
so may damage your SD Memory Card.
1) While the SD Memory Card access lamp is still
flashing orange after an SD Memory Card has
been inserted.
2) While the SD Memory Card access lamp is
flashing such as during recording or during
recording finalization.
Protecting SD Memory Cards
Move the write-protect switch on the SD Memory
Card to the "LOCK" position to prevent recorded
contents being accidentally erased from the card.
Write-protect
switch
Repairing SD Memory Cards
1
•
•
•
•
•
•
•
•
•
33