Uploading The Metadata (Meta Data); Selecting The User Clip Name Recording Method - Panasonic AG-HMC150P Operating Instructions Manual

Clip metadata (continued)

Uploading the metadata (META DATA)

You can perform any of the following operations.
If necessary, make preparations prior to
undertaking the operations.
Loading the metadata
• Insert the SD Memory Card on which the
metadata is recorded into the unit. (For details
on contents of the metadata, see the previous
page.)
Selecting whether to record the metadata on
the SD Memory Card
Initializing the metadata inside the unit
Displaying the metadata inside the unit
1
Press the mode button and select CAM
mode.
2
Press the MENU button.
Menu operation (Page 82)
3
Tilt the lever in the directions to select
META DATA, and push the Operation lever
(or tilt in the direction).
4
Tilt the Operation lever in the
to select item, and push the Operation lever.
CARD READ:
Read metadata set to the SD Memory Card
with the camera.
Move to LOAD, push the Operation lever,
select whether or not to read the metadata
(YES/NO), and push the Operation lever
again.
54
· Up to 10 items of metadata on the SD
Memory Card can be displayed, starting
from the most recent date of production.
· If characters other than single-byte
alphanumeric characters are used in the
metadata file name to be loaded, they are
displayed as " ".
RECORD:
The factory setting for this mode is OFF.
USER CLIP NAME:
The USER CLIP NAME recording method is
selectable. Please refer to the next column
below.
CLIP COUNT RESET:
Reset the counter value to 1.
Select whether or not to reset (YES/NO), and
push the Operation lever.
META DATA PROP:
Select this to display the metadata which has
been recorded in the unit.
META INITIAL SET:
Select this to initialize the metadata which
has been recorded in the unit.
Select YES to initialize the metadata or NO
to cancel the initialization, and push the
Operation lever.
5
Press the MENU button to release the menu
mode.
directions
Selecting the USER CLIP NAME
recording method
Press the MENU button and select META DATA →
USER CLIP NAME to select the recording method.
Two options are available: TYPE1 and TYPE2.
USER CLIP NAME to be recorded
If clip metadata has
been read in
If no clip metadata
has been read in
or if the setting
for recording clip
metadata has been
turned off
TYPE1 TYPE2
Uploaded data
Uploaded
+ COUNT
data
value
Sequential 5- Sequential 5-
digit number, digit number,
in order of in order of
recording recording