Panasonic AG-HMC150P Operating Instructions Manual page 89

SW MODE screen (continued)
Display
Item
mode
USER3 (Camera) Assigns a function to the USER3 button.
(PB) The setting contents are the same as USER1.
INDEX
FOCUS (Camera) Assigns a function to the FOCUS ASSIST button.
ASSIST EXPANDED: The central part of the screen will be enlarged by a factor of about
GRAPH: Displays a frequency distribution graph at the top right in the viewfinder
BOTH: Magnifies the center portion of the image and displays a frequency
WFM (Camera) Switches the waveform display that appears when the WFM button is pressed.
WAVE:
VECTOR:
LCD (Camera) Assigns a function to the LCD button.
(PB) LCD REV:
LCD BL:
• The backlight brightness setting registered in LCD BL will remain stored
even if the function allocated to the LCD button is changed.
Description of settings
4 in the vertical direction and by a factor of about 6 in the horizontal
direction.
"EXPANDED" is displayed on the screen during the expanded
display.
and LCD monitor.
distribution graph.
(The frequency distribution graph is displayed on either the viewfinder or
the LCD monitor.)
Displays as a waveform. Each time the button is pressed the
setting changes in this order: OFF → WAVE (waveform) → OFF.
Displays as a vector. Each time the button is pressed the setting
changes in this order: OFF → VECTOR → OFF.
Each time the button is pressed the setting changes in this order:
OFF → WAVE (waveform) → VECTOR → OFF.
Flips the LCD image vertically and horizontally.
Switches the brightness of the LCD backlight.
indicates the factory setting.
89