Connecting external units (continued)
Computer (non-linear editing/file transfer)
USB connection cable
Computer
(optional)
Ferrite core (included)
•
For details on the computer's conditions and other factors, see page 75.
•
When connecting the camera with a PC using a USB connection cable,
attach the two ferrite cores (included) to the USB connection cable, one at a
position about 5 cm from the PC terminal and the other at a position about
5 cm from the camera terminal. After attaching the cable as shown in the
diagram on the right, close the terminal so that it clicks and locks into place.
•
Always take sufficient care when handling the ferrite core, as it can be easily damaged when dropped or
subjected to other impact.
•
Please use a USB connection cable that is double shielded and no more than 3 meters long.
Video deck (Dubbing)
Video and audio output will be limited to that from the camera.
Audio cable (optional)
White: CH1 (left channel) sound
Red: CH2 (right channel) sound
■
When outputting video and audio signals from the camera to an external device, connect to the
input terminals of the external device.
72
Mini-B
VCR
Video cable
(optional)
Connect these cables
to the terminals on the
video deck.