3Com 100 TX User Manual page 24

2-10 C 2: I
HAPTER NSTALLING THE
FMS 100-TX H
UB
4 Remove the burned-out fuse by pulling it straight out of its socket, as
shown in Figure 2-8.
n ly w
U s e o
Figure 2-8 Removing the Fuse
If you wish, you can store a spare fuse in the front section of the
fuse-holder.
5 Insert a new fuse, rated at 2 A, 250 V, in the fuse-holder.
6 Push the fuse-holder back into the AC receptacle until it snaps in place, and
reconnect the AC power cord.
If the PWR LED remains off, contact your network supplier.
s e
0 V f u
it h 2 5