Backing Sequence Mode; Saving The Backing Sequences Before Turning Off; Playback - Korg i40M User Manual

• Saving the backing sequences before turning off

Warning: When the instrument is turned off, the back-
ing sequences in memory will be erased. Before turn-
ing off the instrument, save the backing sequences on
Page 1: Playback
1 Press B.SEQ to enter the Backing Sequence
mode.
This page (Page 1) allows you to select a backing
sequence and play it.
Note: If Page 1 in the Backing Sequence mode is not
displayed, press EXIT/NO to load it.
Move the cursor to BSQ and use the TEMPO/
2
VALUE buttons to select the la backing sequence
you wish to playback.
Press START/STOP to start playback.
3
Press START.STOP to stop playback.
4
Press RESET to go back to the beginning (mea-
5
sure 001).
Backing Sequence
Arrangement

7. Backing Sequence mode

Measure
Reference • Backing Sequence mode
disk (see "2. Save" on page 131, and "Saving the Back-
ing Sequences on disk" on page 33).
BSQ (Backing sequence)
[0...9]
Selected backing sequence. In theory, the memory
could contain up to a maximum of 10 backing
sequences; in practice, the number of backing
sequences you can fit into memory depends on their
size and complexity. If a song was loaded in Song Edit,
the free memory available for the backing sequences
will be reduced further.
Warning: Backing sequences are not saved on memory
when the instrument is turned off. Before turning off the
instrument, save the backing sequences on disk (see a "2.
Save" on page 131).
M (Measure number)
[001...999]
This is the measure at which playback will begin. Each
track of a backing sequence can record up to 999 mea-
sures. By pressing RESET, the indicator will go back to
001. If the backing sequence reaches the end, the indi-
cator will automatically go back to 001.
81