Modulation Programming (Guitar Mode) - Korg i40M User Manual

Page 20: Modulation programming (Guitar mode)
This page shows the parameters of the MOD (Modula-
tion) effect selected in "Page 15: Guitar effects (1) (Gui-
tar mode)". The parameters are different according to
the selected effect.
Note: These parameters can only be accessed if the
MOD parameter is not set on OFF in "Page 15: Guitar
effects (1) (Guitar mode)".
Chorus
The chorus effect is a delay modulated by an LFO
(Low Frequency Oscillator) and produces a slight vari-
ance in pitch. When it is combined with the direct sig-
nal, an effect as though multiple instruments were
playing in unison is produced. The chorus effect
makes the sound wider and deeper.
MODE ARR.PLAY
CHORD
TEMPO
CHORUS
Speed=10 Depth=15
Note: The chorus effect will not be noticed if (1) if the
output signal is taken in mono or (2) the signal is taken in
stereo, but in the external mixer the pan of the two chan-
nels has the same setting. In order to notice it, the signal
must be taken in stereo and the pan sliders of the two
channels must be turned in the opposite direction.
Level
[0...30]
Chorus level.
Speed
[0...30]
Chorus modulation speed.
M 7
OCTAVE
Level=15
PAGE
Reference • Arrangement Play mode
Depth
[0...30]
Effect intensity.
Flanger
Flanger is similar to chorus, but has a shorter delay. It
varies its harmonic contents in cyclic mode, with the
feeling of getting closer and farther in cyclic mode.
MODE ARR.PLAY
CHORD
TEMPO
FLANGER F.Back=03
Speed=05 Depth=05
F.Back (Feedback)
[0...30]
The feedback is the effect quantity that is sent back to
the flanger and modulated again.
Speed
[0...30]
Effect modulation speed.
Depth
[0...30]
Effect intensity.
Phaser
The phaser is similar to the flanger, but with a faster
modulation. The signal becomes slightly out of tune.
MODE ARR.PLAY
CHORD
TEMPO
PHASER F.Back=03
Speed=12 Depth=15
M 7
OCTAVE
PAGE
M 7
OCTAVE
PAGE
75