Effect Select; Effect Modulation; Effect Placement; Effect 1 Settings - Korg i40M User Manual

Page 4: Effect select
The instrument has two built-in digital effect proces-
sors for the sounds produced by the internal tone gen-
erator. In this page, you can choose the effects assigned
Page 5: Effect modulation
In this page, you can connect the effects to one or two
controls, which allow you to dynamically "modulate"
their intensity. For more information, see page 176.
Page 6: Effect placement
In this page you can setup the effects of the song and
program pan and level of the C and D channels. Pan
Page 7: Effect 1 settings
Page 8: Effect 2 settings
These pages contain the effect parameters selected on
"Page 4: Effect select", that will be used for the
selected arrangement. The settings for the other opera-
tive modes are set in their respective modes.
to the song and switch them on/off. For more informa-
tion, see page 175.
and channel send are programmed on "Page 2: Chan-
nel settings". For more information, see page 177.
The parameters contained in these pages will depend
on the effects you have selected. For more information
on effect programming, see page 178.
Reference • Song Play mode
111